总字数:11900+
摘 要
当前我国工业的快速发展,人们的生活水平快速提高,对商品的消耗也大大提高,而按照需求量进行生产,则就可以减少多余生产造成的浪费,而当前大多数的商品的生产都是按照大概的估计进行生产的。此次设计一款流水线计件,采用红外对管对生产产品的数量进行计算,当检测到当前产品的数量到达用户设置的数量时,进行升高报警,并自动停止流水线,并自动打开打包电机,对其进行打包,结束完成后,自动清除计件,用户可以通过按键设置最大计件数,并且具有掉电保存功能,将设置的数据存储在单片机中,将最大计件数和当前计件数显示在LCD1602液晶显示屏上。
关键词:计件;红外对管;打包;升高报警;LCD1602
Abstract
At present, the rapid development of our industry, people’s living standard is rapidly improving, consumption of commodities is also greatly increased, and according to the demand for production, then can reduce the waste caused by excess production, while the production of most commodities is in accordance with the general estimate. The design a line piece, using infrared tube to calculation of the number of products, when detect the number of the product reached the number of user Settings, rise to alarm, and automatically stop the assembly line, and automatically open the packaging machine, packaging, automatic clear piece, after the completion of the end of the quantity of users is the most important matter can be set by buttons, In addition, it has the function of saving power failure, storing the set data in the single chip microcomputer, and displaying the maximum number of counting pieces and the current number of counting pieces on the LCD1602 LCD screen.
Key words: Piece rate; Infrared tube; Packaging; Elevated alarm; LCD1602
目 录
摘 要
Abstract
1 绪论
2 系统方案设计
3 硬件设计
4 系统程序设计
5 仿真测试
6 实物测试
7 总结
致谢
参考文献
附录
……………..本设计说明书是配套实物和仿真的,完整的设计参考书请购买后下载,购买过程遇到任何问题请联系客服进行咨询。本资料是一次性商品,不支持退货,感谢您对单片机俱乐部的支持……………..
声明:本站所有文章,如无特殊说明或标注,均为本站原创发布。任何个人或组织,在未征得本站同意时,禁止复制、盗用、采集、发布本站内容到任何网站、书籍等各类媒体平台。如若本站内容侵犯了原著者的合法权益,可联系我们进行处理。