总字数14900+

摘  要

随着人们生活水平的提高,人们对生活的舒适度要求越来越高,而衣柜作为必须的家用产品之一,传统的衣物只用来存储衣物,经常会出现衣物变味、发霉、受潮、寻找衣物看不清楚等问题,严重影响到人们的生活,降低了人们衣柜使用的体验。

本设计通过分析传统衣柜存在的缺点,针对各项缺点对智能衣柜提出了相应的功能方案,并按照提出的功能设计对智能衣柜的控制方案、结构、系统硬件、以及软件程序等进行设计,硬件上主要通过温湿度传感器对衣柜中环境的温湿度进行采集,将采集到的环境信息进行转化传输到单片机进行处理,如果检测衣柜内湿度大于设置最大值,进行风扇除湿。另外,也可以定时消毒。衣柜门是否打开主要通过霍尔传感器检测,若打开,则自动点亮照明灯并熄灭紫外线消毒灯。在整个过程中,可以使用按键设置湿度最大值、定时时间,并且通过OLED显示温湿度、柜门状态(打开或关闭),也可以通过WI-FI将数据远程发送到手机上APP,另外可通过APP远程控制除湿、杀菌。

此次设计使得衣柜在使用上相较于传统衣柜更加的方便快捷,经济实用;增强了衣柜在防潮,防霉,舒适性等方面的效果,提高了其存储衣物的能力,具有一定的实用价值。

关键词:健康衣柜;温湿度检测;WIFI;除湿消毒

Abstract

As people living standard rise, people for the comfort of life demand is higher and higher, and the wardrobe, as one of the necessary household products, traditional clothes only to store clothes, frequently clothing stale, mildewy, be affected with damp be affected with damp, looking for clothes look not clear, the serious influence to people’s life, reduce the closet people use experience.

This design through the analysis of the disadvantages of traditional wardrobe, in view of the shortcomings of intelligent wardrobe solutions put forward the corresponding function, and according to the function of the proposed design of the control scheme of intelligent wardrobe, structure, system hardware, and software program design, hardware mainly by temperature and humidity sensors to collect the environment temperature and humidity in the wardrobe, The collected environment information is converted and transmitted to the microcontroller for processing. If the humidity in the wardrobe is greater than the maximum value, the fan is dehumidified. In addition, regular disinfection can also be used. Hall sensor is used to detect whether the closet door is open. If it is open, the lighting lamp will be automatically lit and the ultraviolet disinfection lamp will be extinguished. In the whole process, you can set the maximum humidity and timing time by pressing buttons, display the temperature and humidity, cabinet door status (open or close) through OLED, and send the data remotely to the mobile APP through Wi-Fi. In addition, you can control the dehumidification and sterilization remotely through the APP.

The design makes the wardrobe in use compared with the traditional wardrobe more convenient and fast, economic and practical; It enhances the effect of the wardrobe in moisture-proof, mildew proof, comfort and other aspects, and improves the ability of storing clothes, which has certain practical value..

Key words:Health wardrobe; Temperature and humidity detection; WIFI. Dehumidification disinfection

目  录

摘  要

Abstract

目  录

第1章 绪论

1.1 选题背景及实际意义

1.2 国内外研究现状

1.2.1 国外研究现状

1.2.2 国内研究现状

1.3 本论文研究目标与框架

1.3.1 研究目标

1.3.2 框架

第2章 系统设计方案

2.1 主要模块方案选择

2.1.1 主控芯片方案选择

2.1.2 显示模块方案选择

2.1.3 温湿度检测模块方案选择

2.2.3 无线传输模块方案选择

2.2 整体设计方案

第3章 硬件设计

3.1主控电路模块

3.2温湿度检测电路模块

3.3 霍尔传感器模块

3.4 WiFi模块电路

3.5 OLED显示电路模块

3.7 继电器电路模块

3.8 按键电路模块

第4章 系统程序设计

4.1 编程软件介绍

4.2 主程序流程设计

4.3 按键函数流程设计

4.4 显示函数流程设计

4.5 处理状态函数流程设计

第5章 实物测试

5.1 整体实物测试图

5.2 上电实物测试图

5.3 光照强度检测实物测试

5.4 湿度检测实物测试

5.7 定时消毒实物测试

5.8 照明灯开关控制实物测试

5.9 远程测控实物测试

第六章 结论

参考文献

致谢

附录

附录一:原理图

附录二:PCB

附录三:主程序

……………..本设计说明书是配套实物和仿真的,完整的设计参考书请购买后下载,购买过程遇到任何问题请联系客服进行咨询。本资料是一次性商品,不支持退货,感谢您对单片机俱乐部的支持……………..

发表评论

后才能评论

本站所有资源版权均属于原作者所有,这里所提供资源均只能用于参考学习用,请勿直接商用。若由于商用引起版权纠纷,一切责任均由使用者承担。更多说明请参考 VIP介绍。

最常见的情况是下载不完整: 可对比下载完压缩包的与网盘上的容量,若小于网盘提示的容量则是这个原因。这是浏览器下载的bug,建议用百度网盘软件或迅雷下载。 若排除这种情况,可在对应资源底部留言,或联络我们。

对于会员专享、整站源码、程序插件、网站模板、网页模版等类型的素材,文章内用于介绍的图片通常并不包含在对应可供下载素材包内。这些相关商业图片需另外购买,且本站不负责(也没有办法)找到出处。 同样地一些字体文件也是这种情况,但部分素材会在素材包内有一份字体下载链接清单。

如果您已经成功付款但是网站没有弹出成功提示,请联系站长提供付款信息为您处理

源码素材属于虚拟商品,具有可复制性,可传播性,一旦授予,不接受任何形式的退款、换货要求。请您在购买获取之前确认好 是您所需要的资源