总字数:13000+

摘  要

高层建筑作为当前城市建设的主要标志之一。当前在很多的高层建筑之中,为了提高人们出行的速度和效率,当前在很多的高层建筑之中,电梯作为当前高楼设计最为基础的设计之一。因此在当前高层建筑的设计之中,对当前电梯的外观及其自动化的控制作为当前建筑设计中较为重要的任务之一。

此次设计一款九层电梯,通过软件和硬件配合使用,使其具有检测电梯内当前乘坐电梯的乘客体重的功能,当电梯内超重时进行声光报警提醒,防止重量过大使得电梯损坏,甚至威胁到乘客的人身安全,使用数码管显示当前所在楼层,到达对应楼层指示灯点亮,并实时显示电梯上下运行。为了防止电梯出现故障时有人被困电梯,此次设计额外添加对讲机的功能,用户可以在电梯出现故障时通过对讲机了解是否存在被困人员。此次设计可以解决当前电梯发生事故时,不能及时发现被困人员的问题,从而满足当前人们使用电梯的需求。

关键词:单片机;电梯;自动化控制系统;测控

Abstract

High-rise buildings are one of the main symbols of current urban construction.  At present, in many high-rise buildings, in order to improve the speed and efficiency of people’s travel, elevators are currently one of the most basic designs of high-rise buildings.  Therefore, in the design of the current high-rise buildings, the control of the appearance of the current elevator and its automation is one of the more important tasks in the current architectural design.

This time, a nine-story elevator is designed, and the software and hardware are used together to make it have the function of detecting the weight of the passengers currently taking the elevator in the elevator. When the elevator is overweight, it will give an audible and visual alarm reminder to prevent the elevator from being damaged due to excessive weight. Even threatening the personal safety of passengers, the digital tube is used to display the current floor, the indicator light on the corresponding floor is lit, and the elevator is running up and down in real time. In order to prevent people from being trapped in the elevator when the elevator fails, this design adds the function of the walkie-talkie, and the user can know whether there are trapped people through the walkie-talkie when the elevator fails. This design can solve the problem that trapped people cannot be found in time when an elevator accident occurs, so as to meet the current needs of people to use elevators.

Keywords: single chip microcomputer; The elevator; Automatic control system; Measurement and control

目  录

1 引言

1.1 选题背景及实际意义

1.2 国内外发展历程

2 系统设计方案

2.1 主要元器件选择

2.1.1 主控芯片选择

2.1.2 电机模块方案选择

2.1.3 显示方案选择

2.2 整体设计方案

3 硬件设计

3.1 主控电路模块

3.2 压力传感器电路模块

3.3 数码管显示电路模块

3.4 继电器电路模块

3.5 报警提醒电路模块

3.6 指示灯电路模块

3.7 步进电机电路模块

3.8 矩阵键盘电路模块

3.9 Zigbee传输模块电路

4 系统程序设计

4.1 编程软件介绍

4.2 内机主程序流程设计

4.3 内机按键函数流程设计

4.4 显示函数流程设计

4.5 处理函数流程设计

4.6 从机主程序流程设计

5 仿真制作与调试过程

5.1 电路焊接总图

5.2 电梯上行检测仿真测试

5.3 电梯下行检测仿真测试

5.4 电梯超重仿真测试

5.5 电梯故障仿真测试

6 实物制作与调试过程

6.1 电路焊接总图

5.6 电梯上行检测实物测试

5.7 电梯下行检测实物测试

5.8 电梯超重实物测试

5.9 电梯故障实物测试

7 结论

参考文献

致  谢

附录

附录一:内机原理图

附录二:外机原理图

附录三:内机PCB

附录四:外机PCB

附录五:主程序:

……………..本设计说明书是配套实物和仿真的,完整的设计参考书请购买后下载,购买过程遇到任何问题请联系客服进行咨询。本资料是一次性商品,不支持退货,感谢您对单片机俱乐部的支持……………..

发表评论

后才能评论

本站所有资源版权均属于原作者所有,这里所提供资源均只能用于参考学习用,请勿直接商用。若由于商用引起版权纠纷,一切责任均由使用者承担。更多说明请参考 VIP介绍。

最常见的情况是下载不完整: 可对比下载完压缩包的与网盘上的容量,若小于网盘提示的容量则是这个原因。这是浏览器下载的bug,建议用百度网盘软件或迅雷下载。 若排除这种情况,可在对应资源底部留言,或联络我们。

对于会员专享、整站源码、程序插件、网站模板、网页模版等类型的素材,文章内用于介绍的图片通常并不包含在对应可供下载素材包内。这些相关商业图片需另外购买,且本站不负责(也没有办法)找到出处。 同样地一些字体文件也是这种情况,但部分素材会在素材包内有一份字体下载链接清单。

如果您已经成功付款但是网站没有弹出成功提示,请联系站长提供付款信息为您处理

源码素材属于虚拟商品,具有可复制性,可传播性,一旦授予,不接受任何形式的退款、换货要求。请您在购买获取之前确认好 是您所需要的资源