总字数:15000+

摘 要

伴随着当前科学技术的不断发展,汽车作为人们出行的主要方式之一,而当前车内儿童滞留导致意外发生的次数越来越多,此次设计为了解决儿童滞留车内的问题进行设计。该系统采用STC89C52单片机作为此次设计的主控芯片,采用HX711检测到驾驶位的重量,通过DS18B20检测当前车内的温度,通过SGP30检测当前车内的CO2浓度,采用人体热释电检测当前车内是否有人,当检测到驾驶员离开,锁车按键完成锁车时,检测到车内有人,当检测到温度或者CO2浓度大于设置的最大值进行声光报警,并自动打开开窗,通过GSM模块发送短信给驾驶员,用户在使用时,可以通过按键设置CO2和温度的最大值,并将检测都的信息通过LCD1602液晶显示屏进行显示。此次设计的车内环境监测,可以解决当车内有小孩时CO2浓度过高中毒或者温度过高给孩子带来的问题,所以此次设计具有一定的研究价值和实际意义,也可以体现使得当前生活产品更加的智能化和人性化。

关键词:儿童滞留;CO2检测模块;温度检测模块;人体热释电检测模块;GSM

ABSTRACT

With the continuous development of current science and technology, cars are one of the main ways for people to travel, and the number of accidents caused by children staying in the car is increasing. This design is designed to solve the problem of children staying in the car. The system uses STC89C52 microcontroller as the main control chip of this design, uses HX711 to detect the weight of the driver’s seat, uses DS18B20 to detect the temperature of the current car, uses SGP30 to detect the CO2 concentration in the car, uses human pyroelectricity to detect whether there is a person in the car, when the driver leaves, When the temperature or CO2 concentration is greater than the set maximum value, sound and light alarm will be given, and the window will be opened automatically. SMS will be sent to the driver through GSM module. When using the car, the user can set the maximum value of CO2 and temperature by pressing the key. And will detect the information through the LCD1602 LCD screen display. The design of the car environment monitoring, can solve when there are children in the car CO2 concentration is too high poisoning or temperature is too high to bring children problems, so the design has a certain research value and practical significance, can also reflect the current life products more intelligent and humanized.

KEY WORDS:Detention of children; CO2 detection module; Temperature detection module; Human pyroelectric detection module; GSM

目 录

1 引言

1.1 选题背景及实际意义

1.2 国内外发展历程

1.3 本论文研究目标与框架

2 系统设计方案

2.1 整体设计方案

2.2 主要元器件选择

2.2.1 主控芯片选择

2.2.2 温度检测模块方案选择

2.2.3 显示方案选择

3 硬件设计

3.1 主控电路模块

3.2 温度检测电路模块

3.3 人体热释电红外感应电路模块

3.5 CO2检测模块电路

3.4 LCD1602显示电路模块

3.6 声光报警检测模块电路

3.8 独立按键模块电路

4 系统程序设计

4.1 编程软件介绍

4.2 主程序流程设计

4.3 按键函数流程设计

4.4 显示函数流程设计

4.5 处理状态函数流程设计

5 仿真测试

5.1 整体仿真测试图

5.2 参数设置仿真测试

5.3车内环境检测仿真测试

6 实物制作与调试过程

6.1 整体实物测试图

6.2 参数设置实物测试

6.3车内环境检测实物测试

结论

致谢

参考文献

附录

附录一: 原理图

附录二:PCB

附录三:主程序:

……………..本设计说明书是配套实物和仿真的,完整的设计参考书请购买后下载,购买过程遇到任何问题请联系客服进行咨询。本资料是一次性商品,不支持退货,感谢您对单片机俱乐部的支持……………..

发表评论

后才能评论

本站所有资源版权均属于原作者所有,这里所提供资源均只能用于参考学习用,请勿直接商用。若由于商用引起版权纠纷,一切责任均由使用者承担。更多说明请参考 VIP介绍。

最常见的情况是下载不完整: 可对比下载完压缩包的与网盘上的容量,若小于网盘提示的容量则是这个原因。这是浏览器下载的bug,建议用百度网盘软件或迅雷下载。 若排除这种情况,可在对应资源底部留言,或联络我们。

对于会员专享、整站源码、程序插件、网站模板、网页模版等类型的素材,文章内用于介绍的图片通常并不包含在对应可供下载素材包内。这些相关商业图片需另外购买,且本站不负责(也没有办法)找到出处。 同样地一些字体文件也是这种情况,但部分素材会在素材包内有一份字体下载链接清单。

如果您已经成功付款但是网站没有弹出成功提示,请联系站长提供付款信息为您处理

源码素材属于虚拟商品,具有可复制性,可传播性,一旦授予,不接受任何形式的退款、换货要求。请您在购买获取之前确认好 是您所需要的资源