总字数:17000+

项目编号:mcuclub-hj-005-1

仿真链接:点击跳转

51实物链接:点击跳转

32实物链接:点击跳转

开题报告:点击跳转

51设计说明书:点击跳转

32设计说明书:点击跳转

基于单片机的烟雾实时监测防火系统设计

摘要

随着当前人们生活水平不断提高,人们的生活环境也越来越完善,但是在人们的生活之中,居住环境的防火问题成为人们生活的主要问题,对任何人来说,都需要建设较为完善的防火系统,使得人们在享受生活的同时,也使得家中的财产安全及其人身得到保障。本文研究与设计了一款基于单片机的烟雾实时监测防火系统设计,此次设计采用软件和硬件结合设计一款烟雾检测仪,通过采用STM32单片机作为主控芯片,通过烟雾传感器MQ-2将检测的数据和用户设置的数据进行对比,并将检测的数据显示在显示屏上,当烟雾超过设置的范围时进行打开继电器进行通风,打开净化器对空气进行净化。另外还增加蓝牙远程发送数据,将检测的烟雾及其用户设置的烟雾最值发送到用户的手机,用户也可以通过手机对烟雾最大值进行设置,也可以远程控制风扇及其净化器的打开或者关闭及其模式的切换;此次设计可以检测环境中的烟雾、对小区火灾的预防及其处理具有一定的研究意义。

关键词:STM32单片机;智能防火;烟雾传感器;测控

Abstract

As the people living standard unceasing enhancement, people’s living environment is becoming more and more perfect, but in people’s life, living environment of the fire protection problems become the main problem of people’s life, for anyone, all need to build more perfect fire prevention system, that makes people enjoying life at the same time, also makes the property safety in the home and personal security. In this paper, we study and design a model based on single chip microcomputer real-time monitoring of smoke fire prevention system design, the design USES software and hardware design of a smoke detector, through the adoption of STM32 MCU as the master control chip, through the smoke sensor MQ – 2 set testing data and user data, and test data display on the LCD screen, When the smoke exceeds the set range, open the relay for ventilation, and open the purifier for air purification. In addition, bluetooth remote data is added to send the detected smoke and the maximum value of the smoke set by the user to the user’s mobile phone. The user can also set the maximum value of the smoke through the mobile phone, and can also remotely control the opening or closing of the fan and its purifier as well as the mode switch. This design can detect the smoke in the environment, and has certain research significance for the prevention and treatment of fire in the community..

Key words:STM32 MCU; Intelligent fire prevention; Smoke sensor; Measurement and control

目  录

基于单片机的烟雾实时监测防火系统设计

摘要

Abstract

第一章 绪论

1.1 选题背景及实际意义

1.2 国内外研究现状

1.3 本论文研究目标与框架

第二章 系统设计方案

2.1 整体设计方案

2.2 主要元器件选择

2.2.1 主控芯片选择

2.2.2 显示方案选择

2.2.3 烟雾检测模块方案选择

第三章 硬件设计

3.1 单片机最小系统

3.2 烟雾检测检测模块电路

3.3 报警模块电路

3.4 按键模块电路

3.5 继电器控制电路

3.7 显示模块电路

3.6 蓝牙模块电路

第四章 软件设计

4.1 编程软件介绍

4.2 系统主流程设计

4.3 独立按键

4.4 蓝牙模块子流程

第五章 实物测试

5.1实物焊接总图

5.2 烟雾检测实物测试

5.3 调整烟雾限值实物测试

5.4 蓝牙测控实物测试

第六章 结论

参考文献

致谢

附录

附录1:原理图

附录2:PCB

附录2:主程序

……………..本设计说明书是配套实物和仿真的,完整的设计参考书请购买后下载,购买过程遇到任何问题请联系客服进行咨询。本资料是一次性商品,不支持退货,感谢您对单片机俱乐部的支持……………..

发表评论

后才能评论

本站所有资源版权均属于原作者所有,这里所提供资源均只能用于参考学习用,请勿直接商用。若由于商用引起版权纠纷,一切责任均由使用者承担。更多说明请参考 VIP介绍。

最常见的情况是下载不完整: 可对比下载完压缩包的与网盘上的容量,若小于网盘提示的容量则是这个原因。这是浏览器下载的bug,建议用百度网盘软件或迅雷下载。 若排除这种情况,可在对应资源底部留言,或联络我们。

对于会员专享、整站源码、程序插件、网站模板、网页模版等类型的素材,文章内用于介绍的图片通常并不包含在对应可供下载素材包内。这些相关商业图片需另外购买,且本站不负责(也没有办法)找到出处。 同样地一些字体文件也是这种情况,但部分素材会在素材包内有一份字体下载链接清单。

如果您已经成功付款但是网站没有弹出成功提示,请联系站长提供付款信息为您处理

源码素材属于虚拟商品,具有可复制性,可传播性,一旦授予,不接受任何形式的退款、换货要求。请您在购买获取之前确认好 是您所需要的资源