项目编号:mcuclub-jj-023

仿真连接:点击跳转

51实物链接:点击跳转

32实物链接:点击跳转

32设计说明书链接:点击跳转

字数:15000+

摘要

本文设计了一种智能化的花盆控制系统。该系统采用STM32单片机作为主控制器,通过温度传感、土壤湿度传感器、光照强度检测传感器对植物生长环境进行检测,将采集的数据信号与系统数值进行比较,从而实现了智能花盆的自动或手动浇水功能。随着人们生活质量的逐步提高,越来越多的人会选择在办公室或家中养盆绿植。但由于工作压力常无法及时给绿植浇水,造成植物凋零或死亡。目前市场上有自动盆栽装置,但只能定时浇水,很难及时浇水。还有一种盆栽缺水警报,可以提醒人们浇灌盆栽,但需要用户手动浇水。针对该问题,本文设计了一种智能花盆系统,该花盆系统通过温湿度检测模块、光照强度检测模块对植物生长环境进行循环检测,将采集的数据信号与单片机程序设定的浇水上下限数值进行比较,调整水泵的工作状态,从而实现智能浇水。

关键词: 智能花盆;自动控制;土壤温度检测、土壤湿度检测、光照强度检测

Abstract

This paper designs an intelligent flowerpot control system. The system uses STM32 microcontroller as the main controller, through the temperature sensor, soil moisture sensor, light intensity detection sensor to detect the plant growth environment, the collected data signal and system values are compared, so as to realize the automatic or manual watering function of the intelligent pot. With the gradual improvement of people’s quality of life, more and more people will choose to raise a pot of green plants in the office or at home. However, due to the pressure of work, it is often unable to water the plants in time, causing the plants to wither or die. There is automatic potted device on the market at present, but can water regularly only, it is very difficult to water in time. There is also a potting water alert that reminds people to water their plants, but requires the user to water them manually. Aiming at this problem, this paper designs an intelligent pot system, the flower pot system through the temperature and humidity detection module, the light intensity detection module test cycle on plant growth environment, the collection of data signals and compares it to water microcontroller procedures set by the upper and lower, adjusting the working state of the water pump, so as to realize intelligent watering.

Key words: intelligent flowerpot; Automatic control; Soil temperature detection, soil moisture detection, light intensity detection

摘要

Abstract

第一章 绪论

1.1 研究背景及实际意义

1.2 国内外研究现状

1.3 此次设计目标

第二章 系统方案设计

2.1 主要元器件选择

2.1.1 主控芯片方案选择

2.1.2 显示模块方案选择

2.1.3 温度采集模块方案选择

2.2 整体方案设计

第三章 硬件电路

3.1 主控模块电路

3.1.1 主控模块电路

3.1.2 晶振电路

3.1.3 复位电路

3.1.4 电源电路

3.1.5 下载电路

3.2 OLED显示模块电路

3.3 光照采集模块电路

3.4 土壤湿度采集模块电路

3.5 温度采集模块电路

3.6雨量检测模块

3.7 步进电机模块电路

3.8 按键电路模块

3.9 继电器电路模块

3.10蓝牙模块(ECB02)

第四章 软件设计

4.1 编程软件介绍

4.2 系统主流程设计

4.3 独立按键

4.4 OLED显示流程设计

4.5 蓝牙模块子流程

第五章 实物测试

5.1 整体实物测试图

5.2 上电运行实物测试

5.3 按键功能实物测试

5.4继电器功能实物测试

总结

参考文献

致谢

附录

附录一:原理图

附录二:PCB

附录三:主程序

……………..本设计说明书是配套实物和仿真的,完整的设计参考书请购买后下载,购买过程遇到任何问题请联系客服进行咨询。本资料是一次性商品,不支持退货,感谢您对单片机俱乐部的支持……………..

发表评论

后才能评论

本站所有资源版权均属于原作者所有,这里所提供资源均只能用于参考学习用,请勿直接商用。若由于商用引起版权纠纷,一切责任均由使用者承担。更多说明请参考 VIP介绍。

最常见的情况是下载不完整: 可对比下载完压缩包的与网盘上的容量,若小于网盘提示的容量则是这个原因。这是浏览器下载的bug,建议用百度网盘软件或迅雷下载。 若排除这种情况,可在对应资源底部留言,或联络我们。

对于会员专享、整站源码、程序插件、网站模板、网页模版等类型的素材,文章内用于介绍的图片通常并不包含在对应可供下载素材包内。这些相关商业图片需另外购买,且本站不负责(也没有办法)找到出处。 同样地一些字体文件也是这种情况,但部分素材会在素材包内有一份字体下载链接清单。

如果您已经成功付款但是网站没有弹出成功提示,请联系站长提供付款信息为您处理

源码素材属于虚拟商品,具有可复制性,可传播性,一旦授予,不接受任何形式的退款、换货要求。请您在购买获取之前确认好 是您所需要的资源