项目编号:mcuclub-jj-024
仿真连接:点击跳转
51实物链接:点击跳转
32实物链接:点击跳转
32设计说明书链接:点击跳转
字数:13000+
基于单片机的智能吹风机的设计
摘要
本文设计基于单片机的智能吹风机以温度以及控速为研究对象,选择STM32单片机作为主控芯片,通过DS18B20检测吹风机的线路温度,超过设置值进行蜂鸣器报警,并切断所有负载工作,以MX1508为吹风机的驱动芯片组成的智能吹风机系统。而且可以在使用的过程之中进行吹风机使用环境温度的检测,和对吹风机的预设温度显示在液晶显示屏上,通过对预示值和温度进行比较,最终实现能对吹风机的电机的运行进行控制。
关键词:单片机;DS18B20;显示屏;MX1508
Design of intelligent hair dryer based on single chip microcomputer
Abstract
This paper designs an intelligent hair dryer based on single-chip microcomputer. With temperature and speed control as the research object, STM32 single-chip microcomputer is selected as the main control chip, and the line temperature of the hair dryer is detected through DS18B20. If it exceeds the set value, the buzzer will alarm, and all load work will be cut off. The intelligent hair dryer system is composed of MX1508 as the driving chip of the hair dryer. In addition, it can detect the ambient temperature of the hair dryer during use, and display the preset temperature of the hair dryer on the LCD screen. By comparing the predicted value and temperature, it can finally control the operation of the hair dryer motor.
Keywords: SCM; DS18B20;display; MX1508
目录
摘要
Abstract
第一章 前言
第二章 整体方案设计
第三章 硬件设计
第四章 系统程序设计
第五章 实物测试
总结
参考文献
致谢
附录
……………..本设计说明书是配套实物和仿真的,完整的设计参考书请购买后下载,购买过程遇到任何问题请联系客服进行咨询。本资料是一次性商品,不支持退货,感谢您对单片机俱乐部的支持……………..