总字数:14000+

摘要

随着当前人们经济的发展,人们生活水平的提高,当前人们对财产安全和人身安全的重视程度越来越高,此次设计一款智能门禁,主要是为了解决当前大部分用户使用的密码锁在输入密码锁被旁人盗取,或者存在有人多次输入密码从而盗取用户密码,给用户造成财产损失。

随着电子产品智能化和小型化的不断发展,智能门禁已在生活中得到广泛应用,单片机已成为电子产品研发中的首选控制器。由于单片机具有体积小,功耗低,控制精度高,运行可靠的特点,因此在实际生产中得到了广泛的应用。为了更好地促进电子锁在各个领域的应用,此次设计的基于STC89C52单片机控制的电子密码锁。该机器通过使用单片机STC89C52进行编写程序,并使用LCD12864显示监测的信息,并当监测到当前用户的卡为有效卡,且体温正常,继电器控制门锁打开,监测到体温异常进行声光报警并发送短信。此次设计的电子密码锁具有操作监简单、保密性强的优势。

关键字:智能门禁;STC89C52;LCD12864显示屏

Abstract

Along with the development of the current economic people, people living standard rise, present the importance of property security and personal security is higher and higher, the design of an intelligent entrance guard, mainly to solve the current combination of the majority of users in the input combination lock by others to steal, or there is some input password to steal the user password for many times, to the user caused property losses.

With the continuous development of intelligent and miniaturization of electronic products, intelligent access control has been widely used in life, and single chip microcomputer has become the preferred controller in the research and development of electronic products. Because microcontroller has the characteristics of small size, low power consumption, high control precision and reliable operation, it has been widely used in practical production. In order to better promote the application of electronic lock in various fields, the design of electronic lock based on STC89C52 microcontroller control. The machine uses single chip microcomputer STC89C52 to write programs and LCD12864 to display the monitored information. When the current user’s card is detected to be a valid card and the temperature is normal, the relay controls the door lock to open, and the abnormal temperature is detected to give sound and light alarm and send short messages. The design of electronic password lock has the advantages of simple operation and strong confidentiality.

Key words:intelligent access control; STC89C52; LCD12864 display

目  录

摘要

Abstract

1 引言

1.1 课题研究背景及其研究意义

1.2 国内外研究现状

1.3 课题研究目标

2 系统总体设计方案

2.1 整体方案设计

2.2 主要器件方案选择

2.2.1 主控芯片方案选择

2.2.2 显示模块方案选择

2.2.3 测温模块方案选择

3 硬件设计

3.1 单片机最小系统

3.1.1主控模块电路

3.1.2 晶振电路

3.1.3 复位电路

3.1.4 电源电路

3.2 RFID电路模块

3.3 非接触测温模块

3.4 继电器模块电路

3.5 LCD12864显示模块电路

3.6声光报警报警电路

3.7按键电路

4 系统程序设计

4.1 编程软件介绍

4.2 主程序流程设计

4.3 按键函数流程设计

4.4 显示函数流程设计

4.5 处理状态函数流程设计

第五章 仿真测试

5.1 整体仿真测试图

5.2 上电运行仿真测试

5.3 RFID卡检测仿真测试

5.4 体温监测仿真测试

5.5 电磁锁控制门锁仿真测试

第六章 实物测试

6.1 整体实物测试图

6.2 上电运行实物测试

6.3 RFID卡检测实物测试

6.4 体温监测实物测试

6.5 电磁锁控制门锁实物测试

6 总结与展望

致  谢

参考文献

附录

附录1:原理图

附录2:PCB

附录3:主程序

……………..本设计说明书是配套实物和仿真的,完整的设计参考书请购买后下载,购买过程遇到任何问题请联系客服进行咨询。本资料是一次性商品,不支持退货,感谢您对单片机俱乐部的支持……………..

发表评论

后才能评论

本站所有资源版权均属于原作者所有,这里所提供资源均只能用于参考学习用,请勿直接商用。若由于商用引起版权纠纷,一切责任均由使用者承担。更多说明请参考 VIP介绍。

最常见的情况是下载不完整: 可对比下载完压缩包的与网盘上的容量,若小于网盘提示的容量则是这个原因。这是浏览器下载的bug,建议用百度网盘软件或迅雷下载。 若排除这种情况,可在对应资源底部留言,或联络我们。

对于会员专享、整站源码、程序插件、网站模板、网页模版等类型的素材,文章内用于介绍的图片通常并不包含在对应可供下载素材包内。这些相关商业图片需另外购买,且本站不负责(也没有办法)找到出处。 同样地一些字体文件也是这种情况,但部分素材会在素材包内有一份字体下载链接清单。

如果您已经成功付款但是网站没有弹出成功提示,请联系站长提供付款信息为您处理

源码素材属于虚拟商品,具有可复制性,可传播性,一旦授予,不接受任何形式的退款、换货要求。请您在购买获取之前确认好 是您所需要的资源