实物链接:点击跳转

仿真链接:点击跳转

开题报告链接:点击跳转

设计说明书:点击跳转

总字数:15800+

摘要

随着社会的发展以及智能化的到来,传统的衣柜有些不适应时代的潮流,人们对衣柜的功能提出了更高的要求。本文以STC89C52微处理器作为控制芯片,选用温湿度传感器、霍尔传感器、步进电机、蓝牙模块、时钟模块为主要器件,结合紫外线消毒技术,设计了一套具有除湿、消毒、定时、远程监测和控制等多种功能为一体的智能衣柜。该设计不但可以检测衣柜的温湿度,当监测的温度小于设置的最小值,进行加热处理,监测到当前的湿度大于设置的最大值,进行通风处理,可以实现定时消毒,且在消毒期间,检测到有人打开衣柜时,消毒灯停止消毒,衣柜的照明灯打开,该衣柜还可以作为一个时钟来使用,可以用来显示年月日、时分秒、星期、当前衣柜中的温湿度、衣柜门状态,并将监测到的问谁丢、衣柜门状态等信息传输到用户的手机上,用户可以通过手机对监测的数据进行远程监测和控制。

关键词:STC89C52;衣柜;除湿消毒;照明;定时;远程测控

Abstract

With the development of society and the arrival of intelligence, the traditional wardrobe does not adapt to the trend of The Times, people put forward higher requirements for the function of the wardrobe. This paper takes STC89C52 microprocessor as the control chip, selects temperature and humidity sensor, hall sensor, stepper motor, Bluetooth module, clock module as the main components, combined with ultraviolet disinfection technology, designed a set of intelligent wardrobe with dehumidification, disinfection, timing, remote monitoring and control functions as one. This design not only can detect the temperature and humidity of the wardrobe, when monitoring the temperature of less than the minimum value of set, heat treatment, monitoring and greater than the maximum value is set to the current humidity, ventilation and can realize timing disinfection, and during the disinfection, detect someone open the wardrobe, sterilizing lamp stop disinfection, wardrobe light open, The chest can also be used as a clock, minutes, when can be used to display the date, week, temperature and humidity in the wardrobe, wardrobe door status, and will monitor to ask who lost, wardrobe door status information transmission to the user’s mobile phone, the user can through mobile phones for monitoring data for remote monitoring and control.

Key words: STC89C52; The closet; Dehumidification and disinfection; Lighting; Timing; The remote measurement and control

摘要

Abstract

第一章 绪论

1.1 研究背景及实际意义

1.2 研究现状

1.3 研究目标

第二章 系统方案设计

2.1 主要元器件选择

2.1.1 主控芯片方案选择

2.1.2 显示模块方案选择

2.2 整体方案设计

第三章 硬件电路

3.1 主控模块电路

3.2 显示模块电路

3.3 温湿度检测模块电路

3.4 蓝牙模块电路

3.5 时钟模块电路

3.6 霍尔传感器模块电路

3.7 继电器模块电路

第四章 系统程序设计

4.1 编程软件介绍

4.2 主程序流程设计

4.3 按键函数流程设计

4.4 显示函数流程设计

4.5 处理函数流程设计

第五章 仿真测试

5.1 整体仿真测试图

5.2 上电运行仿真测试

5.3 定时消毒仿真测试

5.4 衣柜温度检测仿真测试

5.5 衣柜湿度检测仿真测试

5.6 衣柜门开关仿真测试

5.7 手机端测控仿真测试

第六章 实物测试

6.1 整体实物测试图

6.2 上电运行实物测试

6.3 定时消毒实物测试

6.4 衣柜温度检测实物测试

6.5 衣柜湿度检测实物测试

6.6 衣柜门开关实物测试

6.7 手机端测控实物测试

总结

参考文献

致谢

附录

附录一:原理图

附录二:PCB

附录三:主程序

……………..本设计说明书是配套实物和仿真的,完整的设计参考书请购买后下载,购买过程遇到任何问题请联系客服进行咨询。本资料是一次性商品,不支持退货,感谢您对单片机俱乐部的支持……………..

发表评论

后才能评论

本站所有资源版权均属于原作者所有,这里所提供资源均只能用于参考学习用,请勿直接商用。若由于商用引起版权纠纷,一切责任均由使用者承担。更多说明请参考 VIP介绍。

最常见的情况是下载不完整: 可对比下载完压缩包的与网盘上的容量,若小于网盘提示的容量则是这个原因。这是浏览器下载的bug,建议用百度网盘软件或迅雷下载。 若排除这种情况,可在对应资源底部留言,或联络我们。

对于会员专享、整站源码、程序插件、网站模板、网页模版等类型的素材,文章内用于介绍的图片通常并不包含在对应可供下载素材包内。这些相关商业图片需另外购买,且本站不负责(也没有办法)找到出处。 同样地一些字体文件也是这种情况,但部分素材会在素材包内有一份字体下载链接清单。

如果您已经成功付款但是网站没有弹出成功提示,请联系站长提供付款信息为您处理

源码素材属于虚拟商品,具有可复制性,可传播性,一旦授予,不接受任何形式的退款、换货要求。请您在购买获取之前确认好 是您所需要的资源