实物链接:点击跳转

仿真链接:点击跳转

设计说明书:点击跳转

总字数:13600+

当前随着科技的发展,人们生活水平不断提高,人们越来越重视当前居住的环境,在人们的居住,但是由于工业发展带来的空气污染也给人们的生活及其生命安全带来一定的损坏,其中对由于工作造成的雾霾现象给人们的生活带来的影响较为明显和严重。因此此次设计一款空气质量检测系统,该系统可以检测当前环境中的空气质量也可以检测当前环境中的PM2.5浓度,用户可以根据自己的需求设置这两个参数的上限值,当检测到空气质量和PM2.5浓度大于设置的最大值进行声光报警提醒用户,且将检测的数据通过LCD1602进行显示,且可以将检测的结果通过蓝牙发送到用户的手机上,用户可以通过手机远程非接触对当前的空气质量进行查询和了解。通过该设计,用户可以了解当前环境中的PM2.5和空气质量的情况,也可以针对当前的情况采取合理的措施,使得居住的空气质量处于正常的范围。

关键词:单片机;空气质量检测;蓝牙;PM2.5检测;声光报警;LCD1602

Abstract

Current with the development of science and technology, continuously improve people’s living standard, people pay more and more attention to the current living environment, in people’s live, but also because of the air pollution caused by industrial development brings to people’s life and life safety of damage, the haze phenomena caused by work for the life of people the impact of the more obvious and serious. So this design a air quality detection system, the system can detect the current environment also can detect the air quality in the current environment of PM2.5 concentrations, the user can according to your requirements set the upper limit of these two parameters, when they tested the air quality and PM2.5 concentrations greater than the maximum value set in acousto-optic alarm to remind users, And the test data is displayed through LCD1602, and the test results can be sent to the user’s mobile phone through Bluetooth, and the user can query and understand the current air quality through the mobile phone. Through this design, users can understand the current environment of PM2.5 and air quality, and can also take reasonable measures according to the current situation, so that the living air quality is in the normal range.

Keywords:Single chip microcomputer; Air quality testing; Bluetooth; PM2.5 detection; Sound and light alarm; LCD1602

第一章 引言 3

1.1 空气质量的研究背景与意义 3

1.2 国内外研究现状 3

1.3 本课题的主要研究内容 5

第二章 控制系统总体设计 7

2.1 系统整体方案设计思路 7

2.2 方案选择 8

2.2.1 单片机选型 8

2.2.2 空气质量检测传感器选型 8

2.2.3 显示器选型 9

第三章 硬件电路 10

3.1 单片机最小系统模块电路 10

3.2 显示模块电路 10

3.3 PM2.5检测模块电路 11

3.4 空气质量检测模块电路 13

3.5 蓝牙无线传输模块电路 16

3.6 声光报警模块电路 16

3.7 按键模块电路 18

第四章 系统程序设计 20

4.1 编程软件介绍 20

4.2 主程序流程设计 21

4.3 按键函数流程设计 22

4.4 显示函数流程设计 23

4.5 处理函数流程设计 23

第五章 仿真测试 25

5.1 整体仿真测试 25

5.2 空气质量仿真运行测试 26

5.3 PM2.5检测仿真测试 27

第六章 实物测试 28

6.1 整体实物焊接图 28

6.2 上电实物测试 28

6.3 空气质量测试 29

6.3 PM2.5测试 30

结论 32

致谢 33

参考文献 34

附录 36

附录一:原理图 36

附录二:PCB 37

附录三:主程序 38

……………..本设计说明书是配套实物和仿真的,完整的设计参考书请购买后下载,购买过程遇到任何问题请联系客服进行咨询。本资料是一次性商品,不支持退货,感谢您对单片机俱乐部的支持……………..

发表评论

后才能评论

本站所有资源版权均属于原作者所有,这里所提供资源均只能用于参考学习用,请勿直接商用。若由于商用引起版权纠纷,一切责任均由使用者承担。更多说明请参考 VIP介绍。

最常见的情况是下载不完整: 可对比下载完压缩包的与网盘上的容量,若小于网盘提示的容量则是这个原因。这是浏览器下载的bug,建议用百度网盘软件或迅雷下载。 若排除这种情况,可在对应资源底部留言,或联络我们。

对于会员专享、整站源码、程序插件、网站模板、网页模版等类型的素材,文章内用于介绍的图片通常并不包含在对应可供下载素材包内。这些相关商业图片需另外购买,且本站不负责(也没有办法)找到出处。 同样地一些字体文件也是这种情况,但部分素材会在素材包内有一份字体下载链接清单。

如果您已经成功付款但是网站没有弹出成功提示,请联系站长提供付款信息为您处理

源码素材属于虚拟商品,具有可复制性,可传播性,一旦授予,不接受任何形式的退款、换货要求。请您在购买获取之前确认好 是您所需要的资源