项目编号：mcuclub-jj-034
仿真连接：点击跳转
51实物链接：点击跳转
32实物链接：点击跳转
51设计说明书链接：点击跳转
总字数：13000+
摘要
当前大多数用户的家庭之中，其灯控还是通过按键对其进行开关控制，当用户出门忘记关灯时，导致家中照明系统一定电亮导致电能的浪费，因此设计一款智能灯控，该系统通过3个LED灯模拟三个房间的灯（客厅、卧室、洗手间）；通过3个按键，可以控制这三个灯的亮灭；通过人体热释电检测当前是否有人，检测到有人且光照强度小于设置的最小值控制照明灯打开，并可以根据当前的光照强度进行自动调节。通过该设计当检测到室内无人或者光照强度大于设置的最大值时，照明灯不点亮，可以节省大量的资源浪费。
关键词：智能灯控；人体热释电；光照强度检测
Abstract
At present, in most users’ families, the light control is still switched on and off by pressing keys. When users forget to turn off the lights when going out, the lighting system in the home will be powered on and lead to a waste of electric energy. Therefore, an intelligent light control is designed. The system simulates the lights in three rooms (living room, bedroom, bathroom) through three LED lights; The three lights can be turned on and off through three buttons; The human body pyroelectric detection is used to detect whether there is a person at present, and the lighting intensity is less than the set minimum value to control the lighting on, which can be automatically adjusted according to the current lighting intensity. Through this design, when it is detected that there is no person in the room or the light intensity is greater than the set maximum value, the lamp will not light up, which can save a lot of resources.
Keywords:intelligent light control; Human pyroelectricity; Light intensity detection
目录
摘要
Abstract
1 引 言
2系统设计方案
3 硬件设计
4 系统程序设计
5 仿真测试
6 实物测试
7 结论
参考文献
致谢
附录
……………..本设计说明书是配套实物和仿真的，完整的设计参考书请购买后下载，购买过程遇到任何问题请联系客服进行咨询。本资料是一次性商品，不支持退货，感谢您对单片机俱乐部的支持……………..