项目编号:mcuclub-jj-038

仿真连接:点击跳转

51实物链接:点击跳转

32实物链接:点击跳转

32设计说明书链接:点击跳转

总字数:14000+

摘要

90后的这代人,每天需要花大量的时间工作,吃饭基本都是外卖解决,随着压力越来越大,身体很容易出现亚健康状态,药品就成为家里常备的必需品之一,但是药品随意摆放会影响人们生活的心情,因此设计一款智能化的收纳箱药箱很有必要;此次设计为了解决该问题,设计一款用户可以通过语音识别控制药箱的开关,通过DS1302获取时间,通过按键可以修改时间,另外,可以添加和删除提醒吃药的时间、手动开关药箱,当提醒时间到时,进行语音提醒吃药,自动打开药箱,并通过红外避障管检测是否取药并放回,放回后5s自动关闭药箱,用户还可以控制药箱中的温湿度处于物品存储适宜的范围之内。该设计可以解决当前用户药品乱放及其摆放位置混乱的问题。

关键词:药箱;DS1302;语音识别;红外避障

Abstract

The post-90s generation needs to spend a lot of time working every day. Eating is basically a takeout solution. With the increasing pressure, the body is prone to sub-health, and medicine has become one of the regular necessities at home. However, the random placement of drugs will affect people’s mood in life, so it is necessary to design an intelligent storage box medicine box; In this design, to solve this problem, the user can control the switch of the medicine box through voice recognition, obtain the time through DS1302, and modify the time by pressing the key. In addition, the user can add and delete the time to remind the user to take medicine, and manually open and close the medicine box. When the reminder time is up, the user can voice remind the user to take medicine, automatically open the medicine box, and detect whether to take medicine and put it back through the infrared obstacle avoidance tube. After putting it back, the medicine box will be automatically closed 5 seconds later, The user can also control the temperature and humidity in the medicine box to be within the appropriate range for storage. The design can solve the problem of disorderly placing and disorderly placing of drugs by current users.

Key words:medicine chest; DS1302;Speech recognition; Infrared obstacle avoidance

摘要

Abstract

第一章 绪论

1.1 研究背景及实际意义

1.2 研究现状

1.3 研究目标

第二章 系统方案设计

2.1 主要元器件选择

2.1.1 主控芯片方案选择

2.1.2 显示模块方案选择

2.1.3 电机方案选型

2.1.4 红外避障模块方案选择

2.2 整体方案设计

第三章 硬件电路

3.1 主控模块电路

3.2 显示模块电路

OLED显示模块电路

3.3 时钟模块

3.4 舵机模块电路设计

3.5 语音播报模块(TTS)

3.6 红外避障模块电路

3.7 按键模块电路

第四章 系统程序设计

4.1 编程软件介绍

4.2 系统主流程设计

4.3 独立按键

4.4 舵机模块子流通

4.5 蓝牙模块子流程

第五章 实物测试

5.1 整体实物测试图

5.2 上电运行实物测试

5.3 定时检测实物测试

5.4 语音播报实物测试

5.5 药箱开关实物测试

总结

参考文献

致谢

附录

附录一:原理图

附录二:PCB

附录三:主程序

……………..本设计说明书是配套实物和仿真的,完整的设计参考书请购买后下载,购买过程遇到任何问题请联系客服进行咨询。本资料是一次性商品,不支持退货,感谢您对单片机俱乐部的支持……………..

发表评论

后才能评论

本站所有资源版权均属于原作者所有,这里所提供资源均只能用于参考学习用,请勿直接商用。若由于商用引起版权纠纷,一切责任均由使用者承担。更多说明请参考 VIP介绍。

最常见的情况是下载不完整: 可对比下载完压缩包的与网盘上的容量,若小于网盘提示的容量则是这个原因。这是浏览器下载的bug,建议用百度网盘软件或迅雷下载。 若排除这种情况,可在对应资源底部留言,或联络我们。

对于会员专享、整站源码、程序插件、网站模板、网页模版等类型的素材,文章内用于介绍的图片通常并不包含在对应可供下载素材包内。这些相关商业图片需另外购买,且本站不负责(也没有办法)找到出处。 同样地一些字体文件也是这种情况,但部分素材会在素材包内有一份字体下载链接清单。

如果您已经成功付款但是网站没有弹出成功提示,请联系站长提供付款信息为您处理

源码素材属于虚拟商品,具有可复制性,可传播性,一旦授予,不接受任何形式的退款、换货要求。请您在购买获取之前确认好 是您所需要的资源