项目编号:mcuclub-jj-047

仿真连接:点击跳转

51实物链接:点击跳转

32实物链接:点击跳转

51设计说明书链接:点击跳转

总字数:14000+

摘要

液位测量一直与自动化密切相关,几乎遍及生产与生活的各个领域。近年来由于新检测原理及微电子技术的发展和应用,使得液位测量仪更趋向小型化和智能化,逐步实现了故障诊断和报警,高精确度、高可靠性、安全性和多功能化。

本文研制的液位和液体流速实时检测系统可以自动检测液位,精确测量液体流速,并能将每个下位机的液位和液体流速信号传送至上位机,在上位机对各个下位机的信号进行巡回检测和显示。当液位低于设定下限值、液体流速过高或过低时,在上位机和相应下位机都能发出声光报警,提醒有关人员及时处理。本系统以51单片机为核心,检测液体的液位、液体流速和有无气泡,从而可以显示、报警。同时与上位机通过无线方式传送每个下位机的数据。

关键词:液位检测、液体流量检测、单片机控制、无线通讯

Abstract

Level measurement has always been closely related to automation, almost in every field of production and life. In recent years, due to the development and application of new detection principle and micro-electronic technology, the liquid level measuring instrument tends to be miniaturized and intelligent, and gradually realizes fault diagnosis and alarm, high accuracy, high reliability, security and multi-function.

The real-time detection system of liquid level and liquid velocity developed in this paper can automatically detect liquid level and accurately measure liquid velocity, and can transmit the signal of liquid level and liquid velocity of each lower machine to the upper machine, which can detect and display the signal of each lower machine on the upper machine. When the liquid level is lower than the set lower limit and the liquid flow rate is too high or too low, the upper computer and the corresponding lower computer can send sound and light alarm to remind the relevant personnel to deal with it in time. This system takes 8051 as the core, detects liquid level, liquid velocity and whether there are bubbles, thus can display, alarm. At the same time with the upper computer through wireless transmission of each lower computer data.

Keywords: liquid level detection, liquid flow detection, SCM control, wireless communication

摘要

目  录

第一章 绪论

1.1 研究背景及实际意义

1.2 国内外研究现状

1.3 研究目标

第二章 系统方案设计

2.1 主要元器件选择

2.2.1 主控芯片方案选择

2.2.2 显示模块方案选择

2.2.3 无线传输方案选择

2.2 整体方案设计

第三章 硬件电路

3.1 主控模块电路

3.2 显示模块电路

3.3 超声波模块电路

3.4 水流量检测模块电路

3.5 继电器模块电路

3.6按键模块电路

3.7 声光报警模块

3.8 蓝牙模块电路

第四章 软件设计

4.1 编程软件介绍

4.2 系统主流程设计

4.3 独立按键

4.4 超声波检测模块子流程

4.5 LCD1602液晶显示子流程

4.6 蓝牙模块子流程

第五章 仿真测试

5.1 仿真总体设计

5.2 上电仿真测试

5.3 流速仿真测试

5.4 水位检测仿真测试

5.5 蓝牙仿真测试

第六章 实物调试

6.1实物总体设计

6.2上电实物测试

6.3 流速实物测试

6.4 水位检测实物测试

6.5 蓝牙实物测试

总结

参考文献

致谢

附录

附录一:原理图

附录二:PCB

……………..本设计说明书是配套实物和仿真的,完整的设计参考书请购买后下载,购买过程遇到任何问题请联系客服进行咨询。本资料是一次性商品,不支持退货,感谢您对单片机俱乐部的支持……………..

发表评论

后才能评论

本站所有资源版权均属于原作者所有,这里所提供资源均只能用于参考学习用,请勿直接商用。若由于商用引起版权纠纷,一切责任均由使用者承担。更多说明请参考 VIP介绍。

最常见的情况是下载不完整: 可对比下载完压缩包的与网盘上的容量,若小于网盘提示的容量则是这个原因。这是浏览器下载的bug,建议用百度网盘软件或迅雷下载。 若排除这种情况,可在对应资源底部留言,或联络我们。

对于会员专享、整站源码、程序插件、网站模板、网页模版等类型的素材,文章内用于介绍的图片通常并不包含在对应可供下载素材包内。这些相关商业图片需另外购买,且本站不负责(也没有办法)找到出处。 同样地一些字体文件也是这种情况,但部分素材会在素材包内有一份字体下载链接清单。

如果您已经成功付款但是网站没有弹出成功提示,请联系站长提供付款信息为您处理

源码素材属于虚拟商品,具有可复制性,可传播性,一旦授予,不接受任何形式的退款、换货要求。请您在购买获取之前确认好 是您所需要的资源