项目编号:mcuclub-cl-008

仿真链接:点击跳转

51实物链接:点击跳转

32实物链接:点击跳转

32设计说明书链接:点击跳转

总字数:13000+

摘  要

伴随着社会的不断的发展,然后人们的生活水平也不断提高。近年来人们出行也主要通过采用出租车进行出行,而目前的出租车也存在很多的问题,收费价格不清楚,使得出租车司机和乘客之间经常出现纠纷。

此次设计通过选择采用单片机作为主控芯片设计一款较为智能的出租车计价器,此次设计解决了夜晚和白天收费不一样的问题,此次设计有两种模式,白天和夜晚,白天的起步价为8元,超过3公里为每公里2.5元/公里,在顾客到达的时候,司机按下暂停的时候,停止计价,在顾客进行下车后可以进行清零,然后下一位顾客上车的时候重新开始。在夜晚的时候其起步价为10元每公里,超过3公里之后每公里3元。此次设计通过软件和硬件进行结合,最终可以解决目前出租车乱收费的问题,并且出租车司机可以查看当前的总单量、总里程、总金额,也可以删除记录,也可以通过按键提醒乘客系好安全带和提醒用户目的地已经到达,而且此次设计稳定性也较强,设备的成本较低,可靠性也较强。

关键词 出租车 计价器  单片机、语言提醒、夜间模式、白天模式

Abstract

With the continuous development of society, then people’s living standards are also improving. In recent years, people mainly travel by taxi, and there are many problems in the current taxi, the price is not clear, so that there are often disputes between taxi drivers and passengers.

This design by selecting the  single-chip microcomputer as main control chip was adopted to design a more intelligent meter taxi, this design solved the problem of the night and day charge is different, the design has two modes, day and night, daytime fare for 8 yuan, more than 3 km of 2.5 kilometers per kilometer per, the arrival of the customer, When the driver presses the pause button, the fare is stopped, cleared after the customer gets off, and then restarted when the next customer gets on the bus. It starts at 10 yuan per kilometer at night and 3 yuan per kilometer after 3 kilometers. This design through the combination of software and hardware, finally can solve the problem of the cab to collect fees in disorder, and taxi drivers can view the current total amount, total mileage, total amount, also can delete records, can also through the buttons to remind passengers to fasten your seat belt and remind user has reached the destination, and the design has strong stability, lower the cost of the equipment, Reliability is also strong.

Keywords taxi meter MCU, language reminder, night mode, day mode

目  录

摘  要

Abstract

第一章 设计概述

1.1 研究背景及其意义

1.2 国内外研究现状

1.3 此次设计实现的功能

第二章 系统设计方案

2.1 系统设计方案

2.2 主要元器件选择

2.2.1 主控芯片方案

2.2.2 显示模块方案

2.2.3 按键模块方案选择

第三章 硬件设计

3.1 主控模块电路

3.2 电机驱动模块电路

3.3 语音输出模块电路

3.4 OLED显示模块电路

3.5测速模块(74HC14D)

3.6 按键模块

3.7蓝牙(ECB02)

第四章 系统程序设计

4.1 编程软件介绍

4.2 系统主流程设计

4.3 独立按键

4.4 直流电机-MX1508驱动模块子流程

4.5 PWM子流程

4.6 蓝牙模块子流程

第五章 实物测试

5.1 整体实物图

5.2 上电实物测试

5.3 白天出租车计价实物测试

5.4 时间、速度设置实物测试

5.5 查看订单实物测试

第六章 总结与展望

参考文献

附录

附录一:原理图

附录二:PCB

附录三:主程序

……………..本设计说明书是配套实物和仿真的,完整的设计参考书请购买后下载,购买过程遇到任何问题请联系客服进行咨询。本资料是一次性商品,不支持退货,感谢您对单片机俱乐部的支持……………..

发表评论

后才能评论

本站所有资源版权均属于原作者所有,这里所提供资源均只能用于参考学习用,请勿直接商用。若由于商用引起版权纠纷,一切责任均由使用者承担。更多说明请参考 VIP介绍。

最常见的情况是下载不完整: 可对比下载完压缩包的与网盘上的容量,若小于网盘提示的容量则是这个原因。这是浏览器下载的bug,建议用百度网盘软件或迅雷下载。 若排除这种情况,可在对应资源底部留言,或联络我们。

对于会员专享、整站源码、程序插件、网站模板、网页模版等类型的素材,文章内用于介绍的图片通常并不包含在对应可供下载素材包内。这些相关商业图片需另外购买,且本站不负责(也没有办法)找到出处。 同样地一些字体文件也是这种情况,但部分素材会在素材包内有一份字体下载链接清单。

如果您已经成功付款但是网站没有弹出成功提示,请联系站长提供付款信息为您处理

源码素材属于虚拟商品,具有可复制性,可传播性,一旦授予,不接受任何形式的退款、换货要求。请您在购买获取之前确认好 是您所需要的资源