设计简介：
项目名：井盖检测
项目编号：mcuclub-dz-011
单片机：STC89C52
功能简介：
1、通过GPS模块定位井盖
2、通过震动模块监测井盖是否震动剧烈，如果震动剧烈，则进行声光报警，并通过GSM模块将经纬度信息发送到手机端
3、通过MPU6050陀螺仪监测井盖是否被移动，如果被移动，则进行声光报警，并通过GSM模块将经纬度信息发送到手机端
总字数：9790
实物链接：点击跳转
设计说明书链接：点击跳转
开题报告链接：点击跳转
答辩PPT链接：点击跳转
摘 要
此次设计采用硬件和软件配合进行设计，硬件选择使用STC12C5A60S2作为此次设计的核心模块，采用MPU6050六轴加速度模块对当前井盖是否移动进行监测，采用震动检测模块SW-420检测井盖是否发生震动，采用GPS对当前井盖的位置进行实时监测，检测到井盖震动或者移动，采用声光报警进行提醒，通过GSM发送提示信息到管理人员的手机上。软件设计采用KEIL5进行程序的编程，将编程程序中的主程序和各个子程序调试无误后，进行软件和硬件的调试，此次设计最终调试可以实现井盖的情况和井盖环境进行实时监测和数据的实时传输。该控制方案更加科学合理，性能稳定，功能完善，成本低廉，实际效果理想。
关键词：STC12C5A60S2；井盖检测；震动检测；移动监测；声光报警；GSM
Design of manhole cover monitoring system based on single-chip microcomputer
Abstract
The design uses hardware and software to design, the hardware selection of STC12C5A60S2 as the core module of the design, using MPU6050 six-axis acceleration module to monitor whether the current manhole cover moving, using the vibration detection module SW-420 detection manhole cover vibration, GPS is used to monitor the position of the current manhole cover in real time, the vibration or movement of the manhole cover is detected, the sound and light alarm is used to remind, and the prompt information is sent to the mobile phone of the management personnel through GSM. Software design using KEIL5 program programming, the programming program in the main program and each subroutine debugging error, software and hardware debugging, the design of the final debugging can realize the manhole cover and manhole cover environment for real-time monitoring and real-time data transmission. The control scheme is more scientific and reasonable, with stable performance, perfect function, low cost and ideal practical effect.
Key words: STC12C5A60S2；Manhole cover detection； Vibration detection； Mobile monitoring； Sound and light alarm；GSM
目 次
摘 要
Abstract
1 引言
2 整体硬件的设计与实现
2.1 系统整体结构
2.3 具体硬件设计
3 软件设计
4 实物制作过程
5 检测结果
6 结论
致 谢
参考文献