设计简介:

项目名:环境监测(实物)
项目编号:mcuclub-dz-225
单片机类型:STM32F103C8T6
具体功能:
1、通过DHT11检测温湿度值,温湿度超过上下限进行声光报警
2、通过光敏电阻检测光照值,超过设置最大值进行声光报警
3、通过BMP180检测大气压值,超过设置最大值进行声光报警
4、通过按键设置上限值
5、通过OLED显示屏显示数据

总字数:10263

实物链接:点击跳转

设计说明书链接:点击跳转

开题报告链接:点击跳转

答辩PPT链接:点击跳转

基于单片机的植物生长检测系统的设计

摘     要

目前,随着我国经济的快速发展和国民生活质量的提高,人们在吃饱的基础上 开始追求吃好和食品绿色安全,因此解决这一问题的植物生长环境监测行业发展也越发迅速起来。当前相关设备功能相对单一,控制系统较为简单,智能化程度有限,不适用于大规模实验,而且成本高,数据传输采集能力不足,不能很好地满足研究需要。在这个问题的基础上,此次设计采用STM32单片机作为主控芯片,结合植物生长环境中影响因素较大的参数,如植物生长环境的温湿度,植物生长环境中的光照强度和植物当前生长环境中的大气压,用户可以根据需求进行这些参数上下限值的设置,当监测到当前监测的参数不在设置的范围之内进行声光报警提醒管理人员,及时对其进行处理,该设计可以满足当前植物生长环境监测的需求,为植物工厂研究的进一步深入提供了保证。

关键词:植物生长;温湿度;光照强度;大气压;声光报警

Design of plant growth detection system based on single chip microcomputer

Abstract

At present, with the rapid development of our economy and the improvement of the quality of life, people began to pursue good eating and food green safety on the basis of satiety. Therefore, the development of plant growth environment monitoring industry to solve this problem has become more and more rapid. At present, the function of relevant equipment is relatively simple, the control system is relatively simple, the degree of intelligence is limited, is not suitable for large-scale experiments, and the cost is high, the data transmission and acquisition ability is insufficient, can not well meet the needs of research. On the basis of this problem, the design uses STM32 microcontroller as the main control chip, combined with the plant growth environment in the influence factors of larger parameters, such as the temperature and humidity of the plant growth environment, the intensity of light in the plant growth environment and the atmospheric pressure in the plant growth environment, users can set the upper and lower limits of these parameters according to the needs, When monitoring the current monitoring parameters are not set within the scope of sound and light alarm to remind the management staff, timely processing, the design can meet the needs of the current plant growth environment monitoring, for plant factory research further provides a guarantee.

Key wordsplant growth; Temperature and humidity; Light intensity; Atmospheric pressure; Sound and light alarm

目  录

1 绪论

1.1 项目背景和意义

1.2 国内外研究现状

1.2.1 国外研究现状

1.2.2 国内研究现状

1.3 项目的设计任务

2 总体方案设计

2.1 主要元器件选择

2.1.1 主控模块方案选择

2.1.2 显示模块方案选择

2.1.3 温湿度监测模块方案选择

2.1.4 光照强度方案选择

2.2 系统总体设计思路

3 硬件系统设计

3.1 主控模块电路

3.2 温湿度监测模块电路

3.3 光照监测模块电路

3.4 大气压监测模块电路

3.5 显示模块电路

3.6 按键模块电路

3.7 声光报警模块电路

4 软件设计

4.1 系统主流程设计

4.2 温湿度检测模块子流程设计

4.3 按键模块子流程设计

4.4 显示模块子流程设计

5 实物测试

5.1 温度监测测试

5.2 湿度监测实物测试

5.3 光照强度监测实物测试

5.4 大气压监测实物测试

结论

致谢

参考文献

附录

附录一:原理图

附录二:PCB

附录三:主程序

……………..本设计说明书是配套实物或仿真来写的,完整的设计参考书请购买后下载,购买过程遇到任何问题请联系客服进行咨询。本资料是一次性商品,不支持退货,感谢您对单片机俱乐部的支持……………..

发表评论

后才能评论

本站所有资源版权均属于原作者所有,这里所提供资源均只能用于参考学习用,请勿直接商用。若由于商用引起版权纠纷,一切责任均由使用者承担。更多说明请参考 VIP介绍。

最常见的情况是下载不完整: 可对比下载完压缩包的与网盘上的容量,若小于网盘提示的容量则是这个原因。这是浏览器下载的bug,建议用百度网盘软件或迅雷下载。 若排除这种情况,可在对应资源底部留言,或联络我们。

对于会员专享、整站源码、程序插件、网站模板、网页模版等类型的素材,文章内用于介绍的图片通常并不包含在对应可供下载素材包内。这些相关商业图片需另外购买,且本站不负责(也没有办法)找到出处。 同样地一些字体文件也是这种情况,但部分素材会在素材包内有一份字体下载链接清单。

如果您已经成功付款但是网站没有弹出成功提示,请联系站长提供付款信息为您处理

源码素材属于虚拟商品,具有可复制性,可传播性,一旦授予,不接受任何形式的退款、换货要求。请您在购买获取之前确认好 是您所需要的资源