总字数:11340

摘要

本文设计了一种适合我国国情,并且操作简单、实用性强,具有高性价比的农业大棚智能控制系统。设计了基于STC89C52的农业大棚智能控制系统。本系统主要由数据采集单元、控制单元、调控设备,构成;数据采集单元主要包括二氧化碳浓度、温湿度、光照强度、土壤湿度等传感器;控制单元以微控制器STC89C52为核心,包括电源模块、报警模块以及控制输出模块等;调控设备主要包括灯光、LED显示、水泵和风扇等。通过传感器采集到的大棚环境参数通过通信模块传输给单片机,对数据进行处理后根据智能控制的原则,输出相应的控制信号来控制调控设备对大棚内的环境进行调节;最后对本系统进行干扰设计,使系统能够稳定的运行。此次在农业大棚种植中具有非常大的应用价值,对我国的农业生产具有非常重要的意义。。

关键词:大棚;环境温湿度;土壤湿度;光照强度;CO2浓度

Abstract

This paper designs an intelligent control system of agricultural greenhouses that suits the situation of our country and is simple in operation, practical and cost-effective. The intelligent control system of agricultural greenhouse based on STC89C52 is designed. The system is mainly composed of data acquisition unit, control unit and regulation equipment. Data acquisition unit mainly includes carbon dioxide concentration, temperature and humidity, light intensity, soil moisture and other sensors; The control unit takes microcontroller STC89C52 as the core, including power module, alarm module and control output module, etc. The control equipment mainly includes lights, LED displays, water pumps and fans. The environmental parameters of the greenhouse collected by the sensor are transmitted to the single chip microcomputer through the communication module. After processing the data, according to the principle of intelligent control, the corresponding control signal is output to control and regulate the environment of the greenhouse. Finally, the interference design of the system, so that the system can run stably. This has a very large application value in agricultural greenhouse planting, it has a very important significance to our agricultural production.

Key words:greenhouses; Ambient temperature and humidity; Soil moisture; Light intensity; CO2 concentration

目  录

摘要 I

Abstract II

第1章  绪论 5

1.1 选题背景及实际意义 5

1.2 国内外发展历程 5

1.2.1我国现今的研究状况 5

1.2.2国外现今的研究状况 6

第2章 系统设计方案 8

2.1 主要元器件选择 8

2.1.1 主控芯片选择 8

2.1.2 显示模块方案选择 8

2.1.3 温度监测模块方案选择 8

2.1.4 光照强度方案选择 9

2.2 整体设计方案 9

第3章 硬件电路设计 11

3.1 主控电路模块 11

3.2 显示电路模块 12

3.3 温湿度监测模块 12

3.4 土壤湿度模块电路 13

3.5 光照强度监测电路 13

3.6 CO2浓度监测电路 13

3.7 继电器电路模块 14

3.8 按键电路模块 15

3.9 声光报警模块电路 15

4 系统程序设计 1

4.1 编程软件介绍 1

4.2 主程序流程设计 1

4.3 按键函数流程设计 2

4.4 显示函数流程设计 3

4.5 处理函数流程设计 4

5 仿真测试 6

5.1 温度监测仿真测试 6

5.2 土壤湿度监测仿真测试 8

5.3 光照强度监测仿真测试 9

5.4 CO2浓度监测仿真测试 10

6 结论 12

致谢 14

附录 15

附录一:原理图 15

附录二:主程序 16

附  录 8

……………..本设计说明书是配套实物或仿真来写的,完整的设计参考书请购买后下载,购买过程遇到任何问题请联系客服进行咨询。本资料是一次性商品,不支持退货,感谢您对单片机俱乐部的支持……………..

发表评论

后才能评论

本站所有资源版权均属于原作者所有,这里所提供资源均只能用于参考学习用,请勿直接商用。若由于商用引起版权纠纷,一切责任均由使用者承担。更多说明请参考 VIP介绍。

最常见的情况是下载不完整: 可对比下载完压缩包的与网盘上的容量,若小于网盘提示的容量则是这个原因。这是浏览器下载的bug,建议用百度网盘软件或迅雷下载。 若排除这种情况,可在对应资源底部留言,或联络我们。

对于会员专享、整站源码、程序插件、网站模板、网页模版等类型的素材,文章内用于介绍的图片通常并不包含在对应可供下载素材包内。这些相关商业图片需另外购买,且本站不负责(也没有办法)找到出处。 同样地一些字体文件也是这种情况,但部分素材会在素材包内有一份字体下载链接清单。

如果您已经成功付款但是网站没有弹出成功提示,请联系站长提供付款信息为您处理

源码素材属于虚拟商品,具有可复制性,可传播性,一旦授予,不接受任何形式的退款、换货要求。请您在购买获取之前确认好 是您所需要的资源