实物链接:点击跳转

开题报告链接:点击跳转

设计说明书:点击跳转

答辩PPT:点击跳转

总字数:15800+

为了解决当前晾衣架只能手动晾晒衣物及其人工收晒衣物的问题,经常由于晾晒不及时错过合适和阳光,或者收取不及时晒干的衣物又被打湿的情况。此次设计一款基于单片机的自动晾衣架,通过温湿度、雨量、光照信息的采集来判断是否满足晾晒条件来进行衣物的晾晒。主要通过各个传感器收集模拟信号发送到单片机,单片机发出指令到各个模块输出数字信号。控制晾衣架的伸缩,控制衣物的自动晾晒和收取

该系统包括单片机、电源部分、温度湿度光强风速采集部分、显示部分、控制执行部分等。能够实现衣服的自动晾晒。本设计在设计时采用了STM32单片机的芯片作为核心,由温湿度传感器DHT11,光敏电阻、雨量监测模块、OLED显示屏以及步进电机ULN2003等组成。用户需要做的只是将衣服放于衣架上,通电便可以享受到非常好的晒衣体验。当湿度低于设定阈值收回,当湿度达到设定的阈值时晾衣架伸出;温度小于设定值时晾衣架收回;光照强度过低时晾衣架收回,光照强度较高时时晾衣架伸出;下雨时晾衣架收回等功能,并可以将监测的数据通过WIFI远程传输到用户的手机,用户可以通过手机远程进行了解,及其远程控制晾衣架进行杀菌和风干等操作。

关键词:自动晾衣架;雨量监测;光照强度控制;温湿度控制;WiFi远程测控

Abstract

In order to solve the problem that the current clothes hanger can only be manually aired and its manual collection and drying clothes, often due to not timely miss the appropriate and sunshine, or not timely collection of dried clothes and wet. The design of an automatic drying rack based on single chip microcomputer, through the collection of temperature and humidity, rainfall, light information to determine whether to meet the drying conditions for clothes drying. Mainly through each sensor to collect analog signals sent to the microcontroller, microcontroller issued instructions to each module output digital signals. Control drying rack expansion, automatic drying and collection of clothes

The system includes microcontroller, power supply, temperature, humidity, light intensity, wind speed acquisition, display, control and execution. It can realize automatic drying of clothes. In this design, STM32 microcontroller chip is used as the core, which is composed of temperature and humidity sensor DHT11, photoresistor, rainfall monitoring module, OLED display screen and stepper motor ULN2003. All the user needs to do is to put the clothes on the hanger, and the electricity will be connected to enjoy a very good drying experience. When the humidity is lower than the set threshold, the clothes hanger will stretch out when the humidity reaches the set threshold. When the temperature is less than the set value, the clothes hanger is withdrawn; When the light intensity is too low, the clothes hanger is withdrawn, and when the light intensity is high, the clothes hanger is extended. It can also transmit the monitored data to the user’s mobile phone through WIFI. The user can learn about it remotely through the mobile phone, and control the drying rack for sterilization and air drying.

Key words: automatic drying rack; Rainfall monitoring; Light intensity control; Temperature and humidity control; WiFi remote measurement and control

摘    要

Abstract

1 绪 论

1.1 课题的研究背景

1.2 国内外研究现状

1.3 主要研究内容

2 系统设计要求及方案设计

2.1 主要元器件选择

2.1.1 单片机的选择

2.1.2 光强检测传感器

2.1.3 温湿度湿度传感器

2.1.4显示模块

2.1.5 电机驱动模块

2.2 结构框图

3 系统硬件电路设计

3.1 单片机最小系统

3.1.1 主控模块电路

3.1.2 晶振电路

3.1.3 复位电路

3.1.4 电源电路

3.1.5 下载电路

3.2  OLED显示模块电路

3.3 温湿度检测模块电路

3.4 光照检测模块电路

3.5 雨量检测模块电路

3.6 电机驱动模块电路

3.7 WiFi模块电路

3.8 独立按键模块电路

4 系统程序设计

4.1 编程软件介绍

4.2 主程序流程设计

4.3 按键函数流程设计

4.4 处理函数流程设计

4.5 显示函数流程设计

5 系统测试与结果分析

5.1 硬件上电测试

5.2 上电实物测试图

5.4 温度检测实物测试

5.4 湿度检测实物测试

5.5 光照强度检测实物测试

5.7 雨滴监测实物测试

6 结论与展望

参考文献

致谢

附录

附录1:原理图

附录2:PCB

附录3:主程序

……………..本设计说明书是配套实物和仿真的,完整的设计参考书请购买后下载,购买过程遇到任何问题请联系客服进行咨询。本资料是一次性商品,不支持退货,感谢您对单片机俱乐部的支持……………..

发表评论

后才能评论

本站所有资源版权均属于原作者所有,这里所提供资源均只能用于参考学习用,请勿直接商用。若由于商用引起版权纠纷,一切责任均由使用者承担。更多说明请参考 VIP介绍。

最常见的情况是下载不完整: 可对比下载完压缩包的与网盘上的容量,若小于网盘提示的容量则是这个原因。这是浏览器下载的bug,建议用百度网盘软件或迅雷下载。 若排除这种情况,可在对应资源底部留言,或联络我们。

对于会员专享、整站源码、程序插件、网站模板、网页模版等类型的素材,文章内用于介绍的图片通常并不包含在对应可供下载素材包内。这些相关商业图片需另外购买,且本站不负责(也没有办法)找到出处。 同样地一些字体文件也是这种情况,但部分素材会在素材包内有一份字体下载链接清单。

如果您已经成功付款但是网站没有弹出成功提示,请联系站长提供付款信息为您处理

源码素材属于虚拟商品,具有可复制性,可传播性,一旦授予,不接受任何形式的退款、换货要求。请您在购买获取之前确认好 是您所需要的资源