实物链接:点击跳转

开题报告链接:点击跳转

设计说明书:点击跳转

答辩PPT:点击跳转

总字数:14700+

为了解决当前人们出行的方便及其当近期工作任务的安排,此次设计一款气象监测系统,该系统可以对当前环境的大部分参数进行监测,如监测当前环境中的温湿度、光照强度、气压值;并可以将监测的数据通过WIFI远程传输到用户的手机上;此次设计分为软件设计和硬件设计。硬件设计包括,采用温湿度检测模块DHT11检测当前环境中的温湿度,采用气压检测模块检测当前环境中的气压值,通过光照电阻检测当前环境中的光照强度,通过WIFI将检测的数据进行远程传输,并可以远程设置温湿度的阈值,检测到阈值不在设置的范围之内,进行声光报警提醒用户;软件设计:采用Keil5作为此次设计程序编程软件,采用AD作为此次设计的原理图和PCB的绘制软件,采用stc-isp作为此次设计程序的烧录软件,采用Visio作为此次设计的流程图绘制软件;通过软硬件配合进行设计实现对当前环境中的部分气象参数进行实时检测,对人们的生活及其出行带来更多的便利。

关键词:气象监测;温湿度检测;光照强度检测;气压检测;WiFi远程测控

Abstract

In order to solve the current people travel convenience and when the recent work task arrangement, the design of a meteorological monitoring system, the system can monitor most of the current environment parameters, such as monitoring temperature and humidity, light intensity, pressure value in the current environment; And can monitor the data through WIFI remote transmission to the user’s mobile phone; The design is divided into software design and hardware design. Includes hardware design, the temperature and humidity detection module DHT11 temperature and humidity in the current environment, the air pressure detection module in the current environment pressure value, through the light resistance of the light intensity of the current environment, through the WIFI will detect data remote transmission, and can set a threshold value of temperature and humidity, remote detecting threshold is outside the scope of setting, Sound and light alarm to remind users; Software design: Keil5 is used as the programming software of this design, AD is used as the schematic diagram and PCB drawing software of this design, STC-ISP is used as the burning software of this design program, and Visio is used as the flowchart drawing software of this design. The real-time detection of some meteorological parameters in the current environment is realized through the design of software and hardware cooperation, which brings more convenience to people’s life and travel.

Key words:meteorological monitoring; Temperature and humidity detection; Light intensity detection; Air pressure detection; WiFi remote measurement and control

摘    要

Abstract

1 绪 论

1.1 课题的研究背景

1.2 国内外研究现状

1.3 主要研究内容

2 系统设计要求及方案设计

2.1 主要元器件选择

2.1.1 单片机的选择

2.1.2 光强检测传感器

2.1.3 温湿度湿度传感器

2.1.4 气压检测模块方案选择

2.1.5显示模块

2.2 结构框图

3 系统硬件电路设计

3.1 单片机最小系统

3.1.1 主控模块电路

3.1.2 晶振电路

3.1.3 复位电路

3.1.4 电源电路

3.1.5 下载电路

3.2  OLED显示模块电路

3.3 温湿度检测模块电路

3.4 光照检测模块电路

3.5 气压检测模块电路

3.6 WiFi模块电路

3.7 声光报警模块电路

3.8 独立按键模块电路

4 系统程序设计

4.1 编程软件介绍

4.2 主程序流程设计

4.3 按键函数流程设计

4.4 显示函数流程设计

4.5 处理状态函数流程设计

5 系统测试与结果分析

5.1 硬件上电测试

5.2 上电实物测试图

5.4 温度检测实物测试

5.4 湿度检测实物测试

结论与展望

参考文献

致谢

附录

附录1:原理图

附录2:PCB

附录3:主程序

……………..本设计说明书是配套实物和仿真的,完整的设计参考书请购买后下载,购买过程遇到任何问题请联系客服进行咨询。本资料是一次性商品,不支持退货,感谢您对单片机俱乐部的支持……………..

发表评论

后才能评论

本站所有资源版权均属于原作者所有,这里所提供资源均只能用于参考学习用,请勿直接商用。若由于商用引起版权纠纷,一切责任均由使用者承担。更多说明请参考 VIP介绍。

最常见的情况是下载不完整: 可对比下载完压缩包的与网盘上的容量,若小于网盘提示的容量则是这个原因。这是浏览器下载的bug,建议用百度网盘软件或迅雷下载。 若排除这种情况,可在对应资源底部留言,或联络我们。

对于会员专享、整站源码、程序插件、网站模板、网页模版等类型的素材,文章内用于介绍的图片通常并不包含在对应可供下载素材包内。这些相关商业图片需另外购买,且本站不负责(也没有办法)找到出处。 同样地一些字体文件也是这种情况,但部分素材会在素材包内有一份字体下载链接清单。

如果您已经成功付款但是网站没有弹出成功提示,请联系站长提供付款信息为您处理

源码素材属于虚拟商品,具有可复制性,可传播性,一旦授予,不接受任何形式的退款、换货要求。请您在购买获取之前确认好 是您所需要的资源