总字数:14000+

摘  要

我国当前家禽孵化器从传统家庭式孵化房向以出禽率高、雏禽质量高、孵化企业效益高的现代孵化企业转变的阶段。采用全自动恒温孵化器是优质、高效并且高产的最佳手段,是家禽孵化迈向现代化的重要标志之一。孵化器的出禽率主要温度和孵化器等条件决定。时下,我国的一些小型的孵化器系统控制仍靠人工经验来管理,严重影响了孵化率和雏禽质量。

为了解决该问题,此次设计一款孵化器,该孵化器采用STM32单片机作为此次设计的主控芯片,采用DS18B20监测孵化环境中的温度,采用DS1302获取当前的时间,实现定时进行翻蛋,用户可以通过按键设置温度的上下限值和定时时间,监测的温度及其当前时间等信息通过OLED进行显示。通过此次设计的孵化器,可以解决当前人工控制孵化器的温度及其翻蛋花费的人力及其物力,且孵化更加的规范。提高孵化率。

关键词:孵化器;DS18B20温度检测;DS1302时钟芯片;定时翻蛋;声光报警

Abstract

At present, domestic poultry incubator has transformed from the traditional domestic incubating house to the modern incubating business with high poultry rate, high quality and high benefits. The use of automatic incubator is the best means of high quality, high efficiency and high yield, which is one of the important symbols of the modernization of poultry incubation. The rate of incubators is mainly determined by temperature and incubator conditions. Nowadays, some small incubator systems in our country are still managed by artificial experience, which has seriously affected the hatching rate and chick quality.

In order to solve this problem, an incubator is designed this time. The incubator adopts STM32 microcontroller as the main control chip of the design, DS18B20 is used to monitor the temperature in the incubation environment, DS1302 is used to obtain the current time, and timed egg turning is realized. Users can set the upper and lower limit of temperature and timing time by pressing keys. The monitored temperature and its current time are displayed through the OLED. Through the design of the incubator, can solve the current artificial control incubator temperature and egg turning cost of manpower and material resources, and incubation more standardized. Increase hatchability.

Keywords: incubator; DS18B20 temperature detection; DS1302 clock chip; Turn eggs regularly; Sound and light alarm

目  录

摘  要

Abstract

1 引言

1.1 选题背景及实际意义

1.2 国内外发展历程

1.3 本论文研究目标与框架

2 系统设计方案

2.1 整体设计方案

2.2 主要元器件选择

2.2.1 主控芯片选择

2.2.2 温度检测模块方案选择

2.2.3 显示方案选择

3 硬件设计

3.1 主控电路模块

3.1.1 主控模块电路

3.1.2 晶振电路

3.1.3 复位电路

3.1.4 电源电路

3.2 温度检测电路模块

3.3 OLED液晶显示模块电路

3.4 继电器模块电路

3.5 声光报警模块电路

3.6 独立按键模块电路

4 系统程序设计

4.1 编程软件介绍

4.2 主程序流程设计

4.3 按键函数流程设计

4.4 显示函数流程设计

4.5 处理状态函数流程设计

5 实物测试

5.1 整体实物测试

5.2 温度检测实物测试

5.3 定时翻单实物测试

6 结论

致谢

参考文献

附录

附录一: 原理图

附录二:PCB

附录三:主程序

……………..本设计说明书是配套实物和仿真的,完整的设计参考书请购买后下载,购买过程遇到任何问题请联系客服进行咨询。本资料是一次性商品,不支持退货,感谢您对单片机俱乐部的支持……………..

发表评论

后才能评论

本站所有资源版权均属于原作者所有,这里所提供资源均只能用于参考学习用,请勿直接商用。若由于商用引起版权纠纷,一切责任均由使用者承担。更多说明请参考 VIP介绍。

最常见的情况是下载不完整: 可对比下载完压缩包的与网盘上的容量,若小于网盘提示的容量则是这个原因。这是浏览器下载的bug,建议用百度网盘软件或迅雷下载。 若排除这种情况,可在对应资源底部留言,或联络我们。

对于会员专享、整站源码、程序插件、网站模板、网页模版等类型的素材,文章内用于介绍的图片通常并不包含在对应可供下载素材包内。这些相关商业图片需另外购买,且本站不负责(也没有办法)找到出处。 同样地一些字体文件也是这种情况,但部分素材会在素材包内有一份字体下载链接清单。

如果您已经成功付款但是网站没有弹出成功提示,请联系站长提供付款信息为您处理

源码素材属于虚拟商品,具有可复制性,可传播性,一旦授予,不接受任何形式的退款、换货要求。请您在购买获取之前确认好 是您所需要的资源