项目编号:mcuclub-cl-023

仿真连接:点击跳转

51实物链接:点击跳转

32实物链接:点击跳转

51设计说明书链接:点击跳转

总字数:16000+

摘 要

汽车在为人们的出行提供了无限便捷的同时,也给人们的身体健康带来一定危害。汽车常因各种原因使得车内环境受到不同程度的污染,如车辆内饰材料和零部件异味污染,车内抽烟所产生的烟雾污染、车外尾气进入车内造成的排气污染等等。当车中CO、CO2、氮氧化合物及硫化物、PM2.5浓度等有害物质浓度达到一定浓度时,会引起人体思维能力减退、头痛、反应迟钝,不仅危害健康,还会带来交通事故隐患。因此研究并控制车内环境对保障绿色健康出行显得尤为重要。目前国内针对车内环境监测的研究主要侧重车内污染物的监测,却忽视了在监测车内环境的同时,综合考虑车外环境的监测与比对。即当前对汽车内环境的检测与外环境的检测以及车内外环境协调控制的研究相对较少。基于此,论文设计一种车内环境智能监测与控制系统,实现对车内以及车外氧含量、颗粒物含量、烟雾、车内温度等参数的实时监测,通过对比车内与车外各污染物浓度情况,综合分析与判断,协同车内空调、电动车窗、电动天窗等系统,进行车内环境智能控制,实现更安全健康的车内呼吸环境。

关键词:CO2检测模块;温度检测模块;汽车;传感器

ABSTRACT

While providing unlimited convenience for people’s travel, cars also bring certain harm to people’s health. The vehicle interior environment is often polluted to varying degrees due to various reasons, such as odor pollution of vehicle interior materials and parts, smoke pollution caused by smoking in the vehicle, and exhaust pollution caused by exhaust entering the vehicle. When the concentration of CO, CO2, nitrogen oxides, sulfide, PM2.5 and other harmful substances in the vehicle reaches a certain concentration, it will cause the decline of human thinking ability, headache, and slow reaction, not only endangering health, but also bringing potential traffic accidents. Therefore, it is particularly important to study and control the vehicle interior environment to ensure green and healthy travel. At present, domestic research on vehicle interior environment monitoring mainly focuses on the monitoring of vehicle interior pollutants, but neglects the monitoring and comparison of vehicle exterior environment while monitoring the vehicle interior environment. That is to say, there are relatively few researches on the detection of the internal and external environment of the vehicle and the coordinated control of the internal and external environment of the vehicle. Based on this, the paper designs an intelligent monitoring and control system for the interior environment of the vehicle to realize the real-time monitoring of the oxygen content, particulate content, smoke, interior temperature and other parameters inside and outside the vehicle. By comparing the concentration of pollutants inside and outside the vehicle, comprehensive analysis and judgment, and cooperating with the air conditioning, electric windows, electric sunroof and other systems inside the vehicle, the paper carries out intelligent control of the interior environment of the vehicle to achieve a safer and healthier breathing environment inside the vehicle.

Key Words: CO2 detection module; Temperature detection module; Automobile; sensor.

目 录

1 引言

1.1 选题背景及实际意义

1.2 国内外发展历程

1.3 本论文研究目标与框架

2 系统设计方案

2.1 主要元器件选择

2.1.1 主控芯片方案选择

2.1.2 显示模块方案选择

2.1.3 按键模块方案选择

2.2 整体设计方案

3 硬件设计

3.1 主控电路模块

3.2 DHT11温湿度检测模块电路

3.3 人体热释电红外感应电路模块

3.4 LCD1602显示电路模块

3.5MQ-135气体检测模块电路

3.6 声光报警检测模块电路

3.7 独立按键模块电路

3.8继电器控制模块

3.9 蓝牙(ECB02)

4 系统程序设计

4.1 编程软件介绍

4.2 系统主流程设计

4.3 独立按键

4.4 温湿度检测模块子流程

4.5 红外测温模块子流程

4.6 LCD1602液晶显示子流程

47 A/D模数转换子流程

4.8 蓝牙模块子流程

5 仿真测试

5.1 整体仿真测试图

5.2 参数设置仿真测试

5.3车内环境检测仿真测试

6 实物制作与调试过程

6.1 整体实物测试图

6.2 参数设置实物测试

6.3车内环境检测实物测试

结论

致谢

参考文献

附录

附录一: 原理图

附录二:PCB

附录三:主程序:

……………..本设计说明书是配套实物和仿真的,完整的设计参考书请购买后下载,购买过程遇到任何问题请联系客服进行咨询。本资料是一次性商品,不支持退货,感谢您对单片机俱乐部的支持……………..

发表评论

后才能评论

本站所有资源版权均属于原作者所有,这里所提供资源均只能用于参考学习用,请勿直接商用。若由于商用引起版权纠纷,一切责任均由使用者承担。更多说明请参考 VIP介绍。

最常见的情况是下载不完整: 可对比下载完压缩包的与网盘上的容量,若小于网盘提示的容量则是这个原因。这是浏览器下载的bug,建议用百度网盘软件或迅雷下载。 若排除这种情况,可在对应资源底部留言,或联络我们。

对于会员专享、整站源码、程序插件、网站模板、网页模版等类型的素材,文章内用于介绍的图片通常并不包含在对应可供下载素材包内。这些相关商业图片需另外购买,且本站不负责(也没有办法)找到出处。 同样地一些字体文件也是这种情况,但部分素材会在素材包内有一份字体下载链接清单。

如果您已经成功付款但是网站没有弹出成功提示,请联系站长提供付款信息为您处理

源码素材属于虚拟商品,具有可复制性,可传播性,一旦授予,不接受任何形式的退款、换货要求。请您在购买获取之前确认好 是您所需要的资源