项目编号:mcuclub-jj-002

仿真连接:点击跳转

51实物链接:点击跳转

32实物链接:点击跳转

32设计说明书链接:点击跳转

总字数:13000+

三层电梯

摘要:高层建筑成为城市建设的一大标志。为了方便人们的出行和工作,高层建筑设计引入了楼字自动化和智能化的科技,电梯成为高层途筑必备的运行工具。所以加强和完善电梯外观及自动化控制系统的设计成为当下高层建筑规划中的一个重要任务。此次设计一款三层电梯,通过软件和硬件配合使,使其具有检测电梯内当前乘坐电梯重的体重,当电梯内超重时进行声光报警提醒,防止重量过大使得电梯损坏,使用数码管显示当前所在楼层,到达对应楼层指示灯点亮,并实时显示电梯上下运行。为了防止电梯在关门时夹道用户,采用红外对管检测是否有人,检测到有人时,电梯门不能关闭,防止用户被电梯门加到。

关键词:单片机;电梯;自动化控制系统;防夹;防超重

Three layers of the elevator

AbstractAbstract: High-rise building has become a major symbol of urban construction. In order to facilitate people’s travel and work, high-rise building design introduced building automation and intelligent technology, elevator has become a necessary operation tool of high-rise road building. Therefore, strengthening and improving the design of elevator appearance and automatic control system has become an important task in high-rise building planning. The elevator design a three layer, through software and hardware to cooperate, make its have tests the elevator in the elevator in heavy weight, when the elevator overweight with sound and light alarm to remind, prevent damage of excessive weight makes the elevator, using digital tube display the current floor, reach the corresponding floor lamp light, and real-time display of elevator running up and down. In order to prevent the elevator from sandwicking users when closing, infrared tube detection is used to detect whether there is someone. When someone is detected, the elevator door can not be closed to prevent users from being added to the elevator door.

Key words: single chip microcomputer; The elevator; Automatic control system; The clip; The overweight

目录

第一章 绪论

1.1 选题背景及实际意义

1.2 国内外发展历程

1.3 本论文研究目标与框架

第2章 系统设计方案

2.1 主要元器件选择

2.1.1 主控芯片选择

2.1.2 电机驱动模块方案选择

2.1.3 显示方案选择

2.2 整体设计方案

第3章 硬件设计

3.1 单片机最小系统

3.2 压力传感器检测电路模块

3.3 分离式红外对射管

3.4 步进电机驱动电路模块

3.5 数码管显示电路模块

3.6 独立按键电路模块

3.7 报警提醒电路模块

3.8 指示灯电路模块

第四章 系统程序设计

4.1 编程软件介绍

4.2 主程序流程设计

4.3 按键函数流程设计

4.4 处理函数流程设计

第五章 实物制作与调试过程

5.1 电路焊接总图

5.2 电梯上行检测实物测试

5.3 电梯下行实物测试

5.4 电梯超重实物测试

5.5 电梯防夹实物测试

第六章 结论

参考文献

致谢

附录

附录一: 原理图

附录二:PCB

附录三:主程序:

……………..本设计说明书是配套实物和仿真的,完整的设计参考书请购买后下载,购买过程遇到任何问题请联系客服进行咨询。本资料是一次性商品,不支持退货,感谢您对单片机俱乐部的支持……………..

发表评论

后才能评论

本站所有资源版权均属于原作者所有,这里所提供资源均只能用于参考学习用,请勿直接商用。若由于商用引起版权纠纷,一切责任均由使用者承担。更多说明请参考 VIP介绍。

最常见的情况是下载不完整: 可对比下载完压缩包的与网盘上的容量,若小于网盘提示的容量则是这个原因。这是浏览器下载的bug,建议用百度网盘软件或迅雷下载。 若排除这种情况,可在对应资源底部留言,或联络我们。

对于会员专享、整站源码、程序插件、网站模板、网页模版等类型的素材,文章内用于介绍的图片通常并不包含在对应可供下载素材包内。这些相关商业图片需另外购买,且本站不负责(也没有办法)找到出处。 同样地一些字体文件也是这种情况,但部分素材会在素材包内有一份字体下载链接清单。

如果您已经成功付款但是网站没有弹出成功提示,请联系站长提供付款信息为您处理

源码素材属于虚拟商品,具有可复制性,可传播性,一旦授予,不接受任何形式的退款、换货要求。请您在购买获取之前确认好 是您所需要的资源