项目编号：mcuclub-jj-021
仿真连接：点击跳转
51实物链接：点击跳转
32实物链接：点击跳转
51设计说明书链接：点击跳转
字数：16000+
基于单片机的智能碗柜监控系统
摘 要
当前很多的用户洗碗之后，只是简单对其进行擦干处理，并可以对其放置的环境进行温湿度的控制，且这些餐具放置的位置一般都是较为阴暗潮湿的，很容易滋生细菌，当人们使用这些餐具的时候，容易将这些细菌吃进体内，给人们的健康带来很大的危害，因此此次设计一款控制碗柜温湿度的餐具，保障餐具存储环境的健康；该设计通过温湿度检测模块DHT11检测当前环境中的温湿度，当温度低于设置值，进行加热，当湿度高于设置值，进行加热和通风，通过霍尔传感器检碗柜门状态，关闭时，自动打开消毒灯，打开时，消毒灯关闭，通过光敏电阻检测光照值，当光照值低于设置最小值且碗柜门打开，则LED照明灯自动打开。本系统基本实现了系统所需要完成的基本功能。
关键词：智能碗柜；温湿度DHT11；霍尔传感器；测控
Abstract
At present, many users simply dry the dishes after washing them, and can control the temperature and humidity of the environment in which they are placed. These tableware are usually placed in a dark and humid place, which is easy to breed bacteria. When people use these tableware, they are easy to eat these bacteria into their bodies, bringing great harm to people’s health. Therefore, this design is a tableware that controls the temperature and humidity of the cupboard, Ensure the health of tableware storage environment; This design detects the temperature and humidity in the current environment through the temperature and humidity detection module DHT11. When the temperature is lower than the setting value, it heats up. When the humidity is higher than the setting value, it heats up and ventilates. When the door of the bowl cabinet is closed, it automatically turns on the disinfection lamp. When it is turned on, the disinfection lamp is turned off. When the light value is lower than the setting minimum value and the door of the bowl cabinet is opened, the LED lamp automatically turns on. This system basically realizes the basic functions that the system needs to complete.
Keywords:intelligent cupboard; Temperature and humidity DHT11; Hall sensor; Measurement and control
目 录
摘 要
Abstract
1 引言
2 方案的设计与论证
3 硬件电路的设计
4 系统程序设计
5 仿真测试
6 实物测试
总结与展望
参考文献
附录
……………..本设计说明书是配套实物和仿真的，完整的设计参考书请购买后下载，购买过程遇到任何问题请联系客服进行咨询。本资料是一次性商品，不支持退货，感谢您对单片机俱乐部的支持……………..