项目编号:mcuclub-jj-021

仿真连接:点击跳转

51实物链接:点击跳转

32实物链接:点击跳转

32设计说明书链接:点击跳转

字数:13000+

基于单片机的智能碗柜监控系统

摘  要

当前很多的用户洗碗之后,只是简单对其进行擦干处理,并可以对其放置的环境进行温湿度的控制,且这些餐具放置的位置一般都是较为阴暗潮湿的,很容易滋生细菌,当人们使用这些餐具的时候,容易将这些细菌吃进体内,给人们的健康带来很大的危害,因此此次设计一款控制碗柜温湿度的餐具,保障餐具存储环境的健康;该设计通过温湿度检测模块DHT11检测当前环境中的温湿度,当温度低于设置值,进行加热,当湿度高于设置值,进行加热和通风,通过霍尔传感器检碗柜门状态,关闭时,自动打开消毒灯,打开时,消毒灯关闭,通过光敏电阻检测光照值,当光照值低于设置最小值且碗柜门打开,则LED照明灯自动打开。本系统基本实现了系统所需要完成的基本功能。

关键词智能碗柜;温湿度DHT11;霍尔传感器;测控

Abstract

At present, many users simply dry the dishes after washing them, and can control the temperature and humidity of the environment in which they are placed. These tableware are usually placed in a dark and humid place, which is easy to breed bacteria. When people use these tableware, they are easy to eat these bacteria into their bodies, bringing great harm to people’s health. Therefore, this design is a tableware that controls the temperature and humidity of the cupboard, Ensure the health of tableware storage environment; This design detects the temperature and humidity in the current environment through the temperature and humidity detection module DHT11. When the temperature is lower than the setting value, it heats up. When the humidity is higher than the setting value, it heats up and ventilates. When the door of the bowl cabinet is closed, it automatically turns on the disinfection lamp. When it is turned on, the disinfection lamp is turned off. When the light value is lower than the setting minimum value and the door of the bowl cabinet is opened, the LED lamp automatically turns on. This system basically realizes the basic functions that the system needs to complete.

Keywords:intelligent cupboard; Temperature and humidity DHT11; Hall sensor; Measurement and control

目  录

摘  要

Abstract

1 引言

1.1 课题背景及其意义

1.2 国内外的研究状况

1.3 本课题研究目标

2 方案的设计与论证

2.1 主要模块方案选择

2.1.1 主控模块方案选择

2.1.2 温湿度检测模块方案选择

2.1.3 显示方案的选择

2.2 整体方案设计

3 硬件电路的设计

3.1 单片机的最小系统设计

3.1.1 主控模块电路

3.1.2 晶振电路

3.1.3 复位电路

3.1.4 电源电路

3.1.5 下载电路

3.2 温湿度监测模块电路

3.3 霍尔传感器模块电路

3.4光敏电阻检测模块电路

3.5 继电器模块电路

3.6 OLED显示模块电路

3.7 按键电路设计

3.8 蓝牙模块电路

4 系统程序设计

4.1 编程软件介绍

4.2 系统主流程设计

4.3 独立按键

4.4 温湿度检测模块子流程

4.5 OLED显示流程设计

4.6 蓝牙模块子流程

5  实物测试

5.1 整体实物测试

5.2 实物上电运行测试

5.3 柜门打开与关闭实物测试

5.4碗柜加热除湿实物测试

5.5碗柜加热除湿实物测试

5.6 蓝牙远程控制实物测试

总结与展望

参考文献

附录

附录一:原理图

附录二:PCB

附录三:主程序

……………..本设计说明书是配套实物和仿真的,完整的设计参考书请购买后下载,购买过程遇到任何问题请联系客服进行咨询。本资料是一次性商品,不支持退货,感谢您对单片机俱乐部的支持……………..

发表评论

后才能评论

本站所有资源版权均属于原作者所有,这里所提供资源均只能用于参考学习用,请勿直接商用。若由于商用引起版权纠纷,一切责任均由使用者承担。更多说明请参考 VIP介绍。

最常见的情况是下载不完整: 可对比下载完压缩包的与网盘上的容量,若小于网盘提示的容量则是这个原因。这是浏览器下载的bug,建议用百度网盘软件或迅雷下载。 若排除这种情况,可在对应资源底部留言,或联络我们。

对于会员专享、整站源码、程序插件、网站模板、网页模版等类型的素材,文章内用于介绍的图片通常并不包含在对应可供下载素材包内。这些相关商业图片需另外购买,且本站不负责(也没有办法)找到出处。 同样地一些字体文件也是这种情况,但部分素材会在素材包内有一份字体下载链接清单。

如果您已经成功付款但是网站没有弹出成功提示,请联系站长提供付款信息为您处理

源码素材属于虚拟商品,具有可复制性,可传播性,一旦授予,不接受任何形式的退款、换货要求。请您在购买获取之前确认好 是您所需要的资源