项目编号:mcuclub-jk-002

仿真连接:点击跳转

51实物链接:点击跳转

32实物链接:点击跳转

32设计说明书链接:点击跳转

总字数:15000+

摘   要

随着科技的进步和社会的发展,人们的生活水平得到了极大的提高。各种方便生活的自动控制系统进入了人们的生活,以单片机为核心的自动感应门控制系统就是其中之一,并在人们的日常生活中发挥着重要的作用。相比于传统的手推门,自动感应门能够自动控制门的开关,还具有安全、稳定和美观等优点,自动感应门在银行、酒店、商场、写字楼等公共场所都得到了广泛的应用。

本文基于自动感应门在日常生活中的广泛应用。提出设计一款基于单片机的自动门控制系统。该系统以SMT32单片机为控制核心,利用两个人体红外热释电检测内外部是否有人,通过分离式红外对管进行防夹触发(步进电机模拟门)。并选用步进电机控制门的开和关。该系统能够自动检测是否有人靠近门,并判断当前门所处的状态,从而实现门的自动打开和关闭。

本系统的特点在于选用新型的人体检测传感器,这可以保证系统能够更加稳定的工作。此外,本系统还选用了红外传感器来检测当前门的状态,从而实现门的智能控制。

关键词:自动门,单片机,控制,热释电红外传感器

Abstract

With the progress of science and technology and the development of society, people’s living standards have been greatly improved. All kinds of automatic control systems that are convenient for life have entered people’s lives. The automatic induction door control system with a single chip microcomputer as the core is one of them and plays an important role in people’s daily life. Compared with the traditional manual door, the automatic sensing door can automatically control the opening and closing of the door, and has the advantages of safety, stability and beauty. The automatic sensing door has been widely used in banks, hotels, shopping malls, office buildings and other public places.

This paper is based on the wide application of automatic induction door in daily life. An automatic door control system based on single chip microcomputer is proposed. The system takes SMT32 single chip microcomputer as the control core, uses two human infrared pyroelectric detectors to detect whether there are people inside and outside, and conducts anti pinch trigger (step motor analog door) on the tube through separated infrared. Step motor is selected to control the opening and closing of the door. The system can automatically detect whether someone is near the door and judge the current state of the door, so as to realize the automatic opening and closing of the door.

The feature of this system is to select a new type of human body detection sensor, which can ensure that the system can work more stably. In addition, the system also uses infrared sensors to detect the current state of the door, so as to achieve intelligent control of the door.

Keywords: automatic door, microcontroller, control, pyroelectric infrared sensor

目录

第一章 绪论

1.1 研究的背景

1.2 国内外研究现状和发展趋势

1.3 红外探测技术的发展

第二章 系统总体方案设计

2.1 主要元器件选择

2.1.1 主控芯片方案选择

2.1.2显示模块方案选择

2.1.3  按键模块方案选择

2.2 系统总体规划

第三章硬件设计

3.1 单片机最小系统

3.1.1 主控模块电路

3.1.2 晶振电路

3.1.3 复位电路

3.1.4 电源电路

3.1.5 下载电路

3.2 红外检测电路

3.3 步进电机电路

3.4 非接触测温电路

3.5红外避障模块电路

3.6人体热释电红外感应模块

3.7OLED显示模块电路

3.8 按键电路模块

3.9 声光报警电路设计

3.10蓝牙模块(ECB02)

4 系统程序设计

4.1 编程软件介绍

4.2 系统主流程设计

4.3 独立按键

4.4 红外测温模块子流程

4.5 步进电机子流程

4.6 OLED显示流程设计

4.7 蓝牙模块子流程

5 实物测试

5.1 实物总体设计

5.2 调整温度值实物测试

5.3 开关门实物测试

5.4 防夹模块实物测试

总结与展望

参考文献

致谢

附录

附录一:原理图

附录二:PCB

附录三:主程序

……………..本设计说明书是配套实物和仿真的,完整的设计参考书请购买后下载,购买过程遇到任何问题请联系客服进行咨询。本资料是一次性商品,不支持退货,感谢您对单片机俱乐部的支持……………..

发表评论

后才能评论

本站所有资源版权均属于原作者所有,这里所提供资源均只能用于参考学习用,请勿直接商用。若由于商用引起版权纠纷,一切责任均由使用者承担。更多说明请参考 VIP介绍。

最常见的情况是下载不完整: 可对比下载完压缩包的与网盘上的容量,若小于网盘提示的容量则是这个原因。这是浏览器下载的bug,建议用百度网盘软件或迅雷下载。 若排除这种情况,可在对应资源底部留言,或联络我们。

对于会员专享、整站源码、程序插件、网站模板、网页模版等类型的素材,文章内用于介绍的图片通常并不包含在对应可供下载素材包内。这些相关商业图片需另外购买,且本站不负责(也没有办法)找到出处。 同样地一些字体文件也是这种情况,但部分素材会在素材包内有一份字体下载链接清单。

如果您已经成功付款但是网站没有弹出成功提示,请联系站长提供付款信息为您处理

源码素材属于虚拟商品,具有可复制性,可传播性,一旦授予,不接受任何形式的退款、换货要求。请您在购买获取之前确认好 是您所需要的资源