设计简介：
项目名：鱼缸（实物）（mcuclub-jj-022）
项目编号：mcuclub-dz-246
单片机类型：STM32F103C8T6
具体功能：
1、通过TDS水质模块检测水质，当水质数值大于设置最大值，进行自动换水（两个水泵）
2、通过防水式DS18B20检测水温，水温超过设置上下限值，进行加热（加热棒）或制冷（风扇）
3、通过水位检测模块检测水位，水位低于设置最小值，进行加水
4、通过光敏电阻检测关照值，光照值过低，进行补光
5、通过按键可实现设置定时投喂、定时充氧时间
6、通过按键可设置各阈值、手动控制换水、加热、制冷、加水、投喂、充氧、补光以及模式切换
7、通过OLED显示屏显示测量值
8、通过语音识别模块可以控制换水、加热、制冷、加水、投喂、充氧、补光以及模式切换
9、通过WIFI模块将测量数据发送到手机端，并可以设置阈值、控制换水、加热、制冷、加水、投喂、充氧、补光以及模式切换
总字数：19460
实物链接：点击跳转
设计说明书链接：点击跳转
开题报告链接：点击跳转
答辩PPT链接：点击跳转
基于单片机的智能鱼缸系统设计
摘 要:水是鱼类生存的必要条件，水质的好坏和鱼类的生存密切相关。现有的鱼缸操作繁琐、功能单一、造价昂贵等缺点。因此，本文以鱼缸环境监测系统为导向，以智能手机和相关水质检测传感器为载体，设计一款操作简便、使用方便的鱼缸智能水质管理系统。
为了解决上述问题，本文设计了一套智能鱼缸监测系统，达到智能监测鱼缸水质环境的目的。本设计采用TDS水质模块检测鱼缸内水的浑浊度，采用防水式DS18B20检测鱼缸内水温，采用水位检测模块检测鱼缸水位，采用光敏电阻检测关照值，采用OLED显示屏显示相关监测值，采用语音模块进行模式的识别，采用按键可以设置定时投喂和充氧时间，还可以控制继电器进行相关工作，达到调节鱼缸环境相关参数的目的，除此之外，还采用了WiFi模块，实现远程控制鱼缸的作用。
本设计关于观赏鱼缸水质管理方面的研究并结合产品设计实践，构建出新的产品交互方式，设计出简单易用的观赏鱼缸智能水质管理系统，帮助用户解决养鱼过程中的水质管理难题，提升用户养鱼体验，同时为今后此方面的设计提供参考。
关键词：鱼缸;传感器;WiFi:单片机；OLED显示屏
Design of intelligent fish tank system based on single
chip microcomputer
Abstract: Water is a necessary condition for the survival of fish, and the quality of water quality is closely related to the survival of fish. The existing fish tank has the disadvantages of cumbersome operation, single function and high cost. Therefore, this paper takes the aquarium environment monitoring system as the guidance, and uses smart phones and related water quality detection sensors as the carrier to design a simple and convenient aquarium intelligent water quality management system.
In order to solve the above problems, this paper designed a set of intelligent fish tank monitoring system, to achieve the purpose of intelligent monitoring of fish tank water quality environment. In this design, TDS water quality module is used to detect the turbidity of the water in the aquarium, waterproof DS18B20 is used to detect the water temperature in the aquarium, water level detection module is used to detect the water level of the aquarium, photoresistor is used to detect the care value, OLED display is used to display the relevant monitoring value, voice module is used to recognize the pattern, and the timing feeding and oxygenation time can be set by pressing buttons. The relay can also be controlled to perform related work to achieve the purpose of adjusting the relevant parameters of the aquarium environment. In addition, the WiFi module is also used to achieve the function of remote control of the aquarium.
This design, based on the research on the water quality management of ornamental fish tanks and combined with the product design practice, builds a new product interaction mode and designs a simple and easy-to-use intelligent water quality management system for ornamental fish tanks to help users solve the water quality management problems in the process of fish farming, improve the user’s fish farming experience, and provide references for future design in this area.
Key words:fish tank; Sensor; WiFi: MCU; OLED display
目 录
摘 要 1
Abstract 1