设计说明书
总字数：15000+
摘 要
目前市面上女士鞋柜存在功能单一、占用空间、使用体验效果不佳且易产生二次污染等问题，针对已有产品的缺陷进行改进，提出了一种新式多功能智能鞋柜。该产品能够有效的对鞋柜环境进行监测和调节，使鞋柜环境维持在最佳的范围之内。本文以鞋柜作为研究对象，采用单片机技术对其进行设计，分为软件设计和硬件设计，硬件设计：采用STM32单片机作为主控芯片，采用DHT11检测鞋柜中的温湿度，采用OLED显示屏将检测的数据进行显示，用户可以通过按键对其参数值进行设置和修改，采用蓝牙模块实现手机端和系统端的双向控制；软件设计：采用Keil5作为此次设计程序编程软件，采用AD作为此次设计的原理图和PCB的绘制软件,采用stc-isp作为此次设计程序的烧录软件，采用Visio作为此次设计的流程图绘制软件；通过软硬件配合进行设计，实现对用户鞋柜中的温湿度进行控制，并进行消毒。通过测试表明，该鞋柜能够有效的对鞋柜环境进行监测和控制，有效的满足了人们的需求。
关键词:鞋柜；温湿度；单片机；测控；Keil5
Abstract
At present, there are some problems in the women’s shoe cabinet, such as single function, occupying space, poor experience effect and easy to produce secondary pollution. Aiming at the defects of existing products, a new multi-functional smart shoe cabinet is proposed. The product can effectively monitor and adjust the environment of the shoe cabinet, so that the environment of the shoe cabinet is maintained within the best range.In this paper, the shoe cabinet as the research object, the use of single-chip technology to design it, divided into software design and hardware design, hardware design: STM32 single chip microcomputer is used as the main control chip, DHT11 is used to detect the temperature and humidity in the shoe cabinet, and OLED display screen is used to display the detected data. Users can set and modify the parameter values by pressing buttons, and 蓝牙 module is used to realize two-way control between the mobile phone and the system side. Software design: Keil5 is used as the programming software of this design program, AD is used as the drawing software of this design schematic and PCB, stc-isp is used as the burning software of this design program, and Visio is used as the flowchart drawing software of this design. Through the design of hardware and software, the temperature and humidity in the user’s shoe cabinet can be controlled and disinfected. The test shows that the shoe cabinet can effectively monitor and control the shoe cabinet environment, and effectively meet the needs of people.
Key words: shoe cabinet; Temperature and humidity; Single-chip computer; Measurement and control; Keil5
目 录
摘 要
Abstract
第1章 绪论
1.1 选题背景及实际意义
1.2 国内外研究现状
1.3 本论文研究目标
第2章 系统设计方案
2.1 主要元器件选择
2.1.1 主控芯片方案选择
2.1.2 显示模块方案选择
2.1.3 温湿度检测模块方案选择
2.2 整体设计方案
第3章 硬件设计
3.1 单片机最小系统
3.1.1 主控模块电路
3.1.2 晶振电路
3.1.3 复位电路
3.1.4 电源电路
3.1.5 下载电路
3.2 显示模块电路
3.3 温湿度检测模块电路
3.4 继电器模块电路
3.5独立按键电路
第4章 系统程序设计
4.1 编程软件介绍
4.2 系统主流程设计
4.3 独立按键
4.4 温湿度检测模块子流程
4.5 OLED显示流程设计
4.6 蓝牙模块子流程
第5章 实物测试
5.1 实物调试部分
5.2 整体焊接实物
5.3 上电实物测试
5.4温度检测实物测试
5.5 湿度检测实物测试
5.6消毒灯打开时间设置实物测试
5.7 蓝牙实物测试
结论
参 考 文 献
致谢
附录
附录1：原理图
附录2：PCB
附录3：主程序
购买后可查看具体内容！