设计简介:

项目名:衣柜除湿消毒(实物)
项目编号:mcuclub-dz-259
单片机类型:STC89C52
具体功能:
1、通过DHT11检测衣柜内温湿度,当湿度大于设置最大值,进行风扇通风除湿;
2、通过DS1302获取当前时间,并能定时进行衣柜内紫外线消毒;
3、通过人体热释电感应模块检测是否有人,如果有人,通过舵机打开衣柜门,打开时,消毒灯关闭,LED照明灯自动打开
4、通过按键修改时间、设置消毒灯打开和关闭时间、设置湿度阈值
5、通过LCD1602显示时间、温湿度值、衣柜门状态

总字数:17380

实物链接:点击跳转

仿真链接:点击跳转

设计说明书链接:点击跳转

开题报告链接:点击跳转

答辩PPT链接:点击跳转

摘  要

随着我国人口的剧增,住房问题越来越紧张。为了实现居住空间的有效利用,大多消费者更喜欢定制家具,尤其是智能化的除湿消毒衣柜,衣柜内常常会选择合适的功能产品予以搭配,以丰富衣柜内部的功能,进而提升消费者使用的体验感。

本文将以定制衣柜为研究对象,运用文献的研究、实物测试等方式,结合人性化、定制化的设计规则进行研究分析。基于STC89C52单片机开发一款智能除湿消毒衣柜,通过DHT11传感器检测衣柜内的温湿度,通过DS1302获取当前时间,并能定时进行衣柜内紫外线消毒,通过人体热释电感应模块检测衣柜门前是否有人,通过按键修改时间、设置消毒灯打开和关闭时间、设置湿度阈值等,并通过显示屏将相关数据进行显示。以上模块的相互配合,共同完成衣柜系统的搭建。

实物测试表明,该衣柜环境监测系统能够有效对衣柜所处环境的相关参数进行监测,并通过相关器件完成相关参数的调节,使衣柜的收纳环境处于适宜的状态,提高消费者的使用体验。

关键词: 衣柜;消毒除湿;单片机;传感器;显示屏

Abstract

With the rapid growth of China’s population, the housing problem is becoming increasingly tense. In order to achieve effective utilization of living space, most consumers prefer customized furniture, especially intelligent dehumidification and disinfection wardrobes. Suitable functional products are often selected to complement the wardrobes to enrich their internal functions and enhance the consumer experience.

This article will take customized wardrobes as the research object, using literature research, physical testing, and other methods, combined with humanized and customized design rules for research and analysis. Based on the STC89C52 microcontroller, an intelligent dehumidification and disinfection wardrobe is developed. The temperature and humidity inside the wardrobe are detected using DHT11 sensors, the current time is obtained through DS1302, and UV disinfection inside the wardrobe can be carried out on a regular basis. The human body pyroelectric sensing module detects whether there is anyone in front of the wardrobe door, and the time is modified by pressing buttons, the disinfection light on and off time is set, and the humidity threshold is set. The relevant data is displayed on the display screen. The above modules work together to complete the construction of the wardrobe system.

Physical testing has shown that the wardrobe environment monitoring system can effectively monitor the relevant parameters of the environment where the wardrobe is located, and adjust the relevant parameters through relevant devices to ensure that the storage environment of the wardrobe is in a suitable state and improve the user experience.

Keywords:wardrobe; Disinfection and dehumidification; Single chip microcomputer; Sensors; display screen

目  录

摘  要

Abstract

第一章 设计概述

1.1 研究背景及其意义

1.2 国内外研究现状

1.3 此次设计实现的功能

1.4 衣柜监测系统的社会意义

第二章 系统设计方案

2.1 系统设计方案

2.2 主要元器件选择

2.2.1 主控芯片方案

2.2.2 显示模块方案选择

2.2.3 按键模块方案选择

2.2.4温湿度检测模块方案选择

第三章 硬件设计

3.1 主控模块电路

3.2 DHT11温湿度检测模块电路

3.3人体红外检测模块

3.4舵机模块电路设计

3.5 时钟模块电路

3.6 LCD1602显示模块电路

3.7 按键模块

3.8继电器控制模块

第四章 系统程序设计

4.1 编程软件介绍

4.2 系统主流程设计

4.3独立按键

4.4温湿度检测模块子流程

4.5时钟模块子流程

4.6LCD1602液晶显示子流程

4.7舵机模块子流通

第五章 仿真测试

5.1 整体仿真图

5.2 上电仿真测试

5.3 温湿度模块仿真测试

5.4 是否有人仿真测试

5.5 时间参数仿真测试

第六章 实物测试

6.1实物焊接

6.2 上电实物测试

6.3 温湿度模块实物测试

6.4 是否有人实物测试

6.5 时间参数实物测试

总结

参考文献

附录

附录一:原理图

附录二:PCB

附录三:主程序

……………..本设计说明书是配套实物或仿真来写的,完整的设计参考书请购买后下载,购买过程遇到任何问题请联系客服进行咨询。本资料是一次性商品,不支持退货,感谢您对单片机俱乐部的支持……………..

发表评论

后才能评论

本站所有资源版权均属于原作者所有,这里所提供资源均只能用于参考学习用,请勿直接商用。若由于商用引起版权纠纷,一切责任均由使用者承担。更多说明请参考 VIP介绍。

最常见的情况是下载不完整: 可对比下载完压缩包的与网盘上的容量,若小于网盘提示的容量则是这个原因。这是浏览器下载的bug,建议用百度网盘软件或迅雷下载。 若排除这种情况,可在对应资源底部留言,或联络我们。

对于会员专享、整站源码、程序插件、网站模板、网页模版等类型的素材,文章内用于介绍的图片通常并不包含在对应可供下载素材包内。这些相关商业图片需另外购买,且本站不负责(也没有办法)找到出处。 同样地一些字体文件也是这种情况,但部分素材会在素材包内有一份字体下载链接清单。

如果您已经成功付款但是网站没有弹出成功提示,请联系站长提供付款信息为您处理

源码素材属于虚拟商品,具有可复制性,可传播性,一旦授予,不接受任何形式的退款、换货要求。请您在购买获取之前确认好 是您所需要的资源