项目编号:mcuclub-dz-307

设计简介:

项目名:红外感应洗手液
项目编号:mcuclub-dz-307
单片机类型:STM32F103C8T6
具体功能:
1、通过红外避障模块检测人手是否放在洗手液下方,如果检测到,则通过水泵抽水洗手液2s,自动停止
2、通过OLED显示七步洗手法教程,并通过语音播报

总字数:13208

实物链接:点击跳转

设计说明书链接:点击跳转

开题报告链接:点击跳转

答辩PPT链接:点击跳转

基于单片机的非接触洗手液控制系统设计

摘要在疫情的背景下,日常的洗手消毒工作越来越成为人们生活中的必要环节,而目前使用较为广泛的手按式消毒瓶, 已不能满足当前形势的需求,因此,设计一款智能洗手消毒仪,减少了人员之间的相互接触,为防疫工作带来便利,具有良好的发展前景。

本设计以STM32单片机作为主控芯片。通过红外避障模块检测人的手是否放在洗手液下方,如果检测到手在洗手液装置下面,则通过水泵抽水洗手,2s后自动停止,并通过OLED显示七步洗手法教程,此外,还可以通过语音播报七步洗手法教程。该系统的研究和开发,能够有效的实现消毒工作智能化和自动化。具有很好的推广和普及意义。

关键词:洗手液;红外避障管;水泵;单片机

Design of non-contact hand sanitizer control system based on single chip microcomputer

Abstract:In the context of the epidemic, the daily hand-washing disinfection work has become more and more a necessary part of people’s lives, and the more widely used hand-pressing disinfection bottles can no longer meet the needs of the current situation, therefore, the design of an intelligent hand-washing disinfection instrument can reduce the contact between personnel and bring convenience to the epidemic prevention work, which has a good development prospect.

This design uses STM32 single chip microcomputer as the main control chip. The infrared obstacle avoidance module is used to detect whether the hand is placed under the hand sanitizer. If the hand is detected under the hand sanitizer device, the hand is washed by pumping water and automatically stops after 2s, and the seven-step washing technique tutorial is displayed through OLED. In addition, the seven-step washing technique tutorial can be broadcast through voice. The research and development of this system can effectively realize the intelligent and automatic disinfection work. It has good promotion and popularization significance.

Key words:hand sanitizer; Infrared obstacle avoidance tube; Water pump; Single chip microcomputer

目录

1 引言

1.1 课题研究背景与意义

1.2 国内外研究现状

1.2.1国内研究现状

1.2.2国外研究现状

1.3 此次设计的目标

2 基于单片机应急电源的总体设计

2.1 主要模块方案选择

2.1.1 主控芯片方案选择

2.1.2 红外传感器模块方案选择

2.1.3 继电器模块方案选择

2.1.4显示模块方案选择

2.1 系统总体结构设计

3 硬件电路

3.1 单片机最小系统

3.1.1 主控模块电路

3.1.2 晶振电路

3.1.3 复位电路

3.1.4 电源电路

3.1.5 下载电路

3.2  红外避障模块电路

3.3  继电器控制模块

3.4  OLED显示模块电路

3.5  语音播报模块(TTS)

4 系统程序设计

4.1 编程软件介绍

4.2 系统主流程设计

4.3 OLED显示流程设计

5  实物调试

5.1 硬件调试

5.2 软件调试

5.3 实物总体设计

5.4 抽取适量洗手液实物测试

5.5 语音播报模块实物测试

结论与展望

参考文献

致  谢

附录A 原理图

附录B PCB

附录C 主程序

……………..本设计说明书是配套实物或仿真来写的,完整的设计参考书请购买后下载,购买过程遇到任何问题请联系客服进行咨询。本资料是一次性商品,不支持退货,感谢您对单片机俱乐部的支持……………..

发表评论

后才能评论

本站所有资源版权均属于原作者所有,这里所提供资源均只能用于参考学习用,请勿直接商用。若由于商用引起版权纠纷,一切责任均由使用者承担。更多说明请参考 VIP介绍。

最常见的情况是下载不完整: 可对比下载完压缩包的与网盘上的容量,若小于网盘提示的容量则是这个原因。这是浏览器下载的bug,建议用百度网盘软件或迅雷下载。 若排除这种情况,可在对应资源底部留言,或联络我们。

对于会员专享、整站源码、程序插件、网站模板、网页模版等类型的素材,文章内用于介绍的图片通常并不包含在对应可供下载素材包内。这些相关商业图片需另外购买,且本站不负责(也没有办法)找到出处。 同样地一些字体文件也是这种情况,但部分素材会在素材包内有一份字体下载链接清单。

如果您已经成功付款但是网站没有弹出成功提示,请联系站长提供付款信息为您处理

源码素材属于虚拟商品,具有可复制性,可传播性,一旦授予,不接受任何形式的退款、换货要求。请您在购买获取之前确认好 是您所需要的资源