设计简介：
项目编号：mcuclub-dz-280
设计简介：
项目名：婴儿箱
项目编号：mcuclub-dz-280
单片机类型：STC89C52
具体功能：
1、通过DHT11检测婴儿箱内温湿度，当温湿度不在设置的阈值内，进行加热制冷、加湿除湿
2、通过SGP30检测CO2浓度，如果浓度大于设置最大值，进行通风
3、通过MLX90614红外测温模块，测量体温，如果体温不在设置的最大最小值之间，进行蜂鸣器报警
4、通过按键可是设置各阈值
5、通过LCD1602显示各测量数据
总字数：18859
实物链接：点击跳转
仿真链接：点击跳转
设计说明书链接：点击跳转
开题报告链接：点击跳转
答辩PPT链接：点击跳转
摘 要
随着人们生活水平的提高，人们对婴儿的照顾更加周到，但是婴儿无行为能力，抵抗力弱，一旦遇见突发情况，极易发生危险，这就要求家庭需对婴儿进行安全监护，有效降低其遇到危险的可能，从而提高婴儿的安全性。随着相关等相关技术的发展，婴儿监护系统的发展进行关键时期。
本设计采用STC89C52单片机作为主控芯片，开发一款智能婴儿箱，采用三个不同的传感器分别监测儿箱内温湿度、CO2浓度以及婴儿体温，通过按键进行界面切换和阈值设置，并通过LCD1602对温湿度、CO2浓度、体温等测量数据进行实时显示，方便监护人实时查看婴儿箱环境参数，进而通过相关外围设备调节婴儿箱的环境参数，保证婴儿箱内的环境参数处于最佳状态，为婴儿提高优良的生活环境。
实物测试表明，该婴儿监测系统基本实现了预设功能，为婴幼儿的成长提供优良的环境。
关键词: 婴儿箱;传感器;单片机;按键;显示屏
Abstract
With the improvement of people’s living standards, people’s care for infants is more thoughtful, but infants have no behavioral ability and weak resistance, once they encounter unexpected situations, they are prone to danger, which requires families to carry out safety monitoring of infants, effectively reduce the possibility of their exposure to danger, thereby improving the safety of infants. With the development of related technologies, the development of infant monitoring systems has undergone a critical period.
In this design, STC89C52 single chip microcomputer is used as the main control chip to develop a smart baby box. Three different sensors are used to monitor the temperature and humidity in the baby box, the concentration of CO2 and the temperature of the baby, and the interface switch and threshold setting are carried out by pressing buttons, and the measurement data of temperature and humidity, CO2 concentration and temperature are displayed in real time through LCD1602. It is convenient for the guardian to view the environmental parameters of the baby box in real time, and then adjust the environmental parameters of the baby box through relevant peripheral devices to ensure that the environmental parameters of the baby box are in the best state, and improve the good living environment for the baby.
The actual test shows that the infant monitoring system basically realizes the preset function and provides a good environment for the growth of infants.
Keywords：baby box; Sensor; Single-chip computer; Key; Display screen
目 录
摘 要
Abstract
第一章 设计概述
第二章 系统设计方案
第三章 硬件设计
第四章 系统程序设计
5 系统仿真测试
第六章 实物测试
总结
致谢
参考文献
附录